What is h15 loading?
An H-15 loading is represented by a two-axle single unit truck weighing 30,000 pounds (15 tons) with 6,000 pounds on its steering axle and 24,000 pounds on its drive axle.
What is hl93 loading?
HL-93 is a type of theoretical vehicular loading proposed by AASHTO in 1993. It is used as the design loading for highway structures in USA and other countries where AASHTO code is followed. AASHTO HL-93 vehicular live load is a combination of three different loads, HL-93 Design Truck (formerly, HS20-44 Truck)
What is an H10 load?
H-5 truck (10,000 lb. vehicle) Emergency vehicle (15,000 lb. ambulance or fire truck) H-10 truck (20,000 lb.
What is H20 live load?
An “H20” truck only has one axle under the trailer and a total load of 40,000 pounds. An “H25” or an “HS25” series truck will be almost identical – except the drive axle will be 10,000 pounds and the axle(s) under the trailer will be 40,000 pounds each.
What is AASHTO Lane load?
The design lane load consists of a load of 0.64 klf uniformly distributed in the longitudinal direction. See Figure 3 for the loading diagrams. Transversely, the design lane load is assumed to be uniformly distributed over a 10.0-foot width.
What is h-20/hs-20 loading?
What is H-20/HS-20 Loading? AASHTO’s H-20 and HS-20 are live load ratings applied to the design of bridges or other suspended items (e.g. lids for concrete vaults). Designers use H-20 or HS-20 from AASHTO, or specific axle configurations, to express the extreme load effect created by heavy vehicles such as transports, buses and fire trucks.
What is the AASHTO axle load?
This is the term used by AASHTO and ACI to describe normal MOVING traffic loading conditions up to 18-wheeler loading. This loading assumes a 16,000 lbs wheel load and therefore a 32,000 lbs axle load.
What is the AASHTO load test for H-20 lids?
The AASHTO M-306 standard calls for a safety factor of 2.5 to be applied to the 16,000 lb. wheel load. (2.5 x 16,000 = 40,000 lbs). Therefore, for H-20 rated lids, a 40,000 lb proof load test is required.
What does HS-20 mean on a trench structure?
This image shows the potential heavy duty traffic loading imposed on underground trench structures. What does HS-20 traffic rating mean? This is the term used by AASHTO and ACI to describe normal MOVING traffic loading conditions up to 18-wheeler loading. This loading assumes a 16,000 lbs wheel load and therefore a 32,000 lbs axle load.