Who prepares the SPCC plan?
– A written SPCC Plan must be prepared and certified by a licensed professional engineer. – The plan must be re-evaluated every 5 years or each time a change is made to the facility that affects the plan. – Formal, annual SPCC Plan Training must be provided to all oil-handling personnel.
What is SPCC code?
The applicable regulation and requirements are found in Title 40 of the Code of Federal Regulations (CFR) Part 112. The goal of the SPCC regulation is to prevent oil from reaching navigable waters and adjoining shorelines, and to contain discharges of oil.
Is SPCC only for oil?
The Federal SPCC Rule is not limited to petroleum oils and only applies if the business is close to “navigable waters.” Depending on what you store and where you’re located, it is possible to be subject to both laws.
How often do you have to update your SPCC plan?
every five years
You must review your Plan every five years to include any changes in oil storage or spill prevention procedures or equipment at your facility. Do state engineering requirements impact SPCC Plan self-certification? Some states require a PE to perform certain functions, including certifying SPCC Plans.
Who needs a SPCC?
A facility is covered by the SPCC rule if it has an aggregate aboveground oil storage capacity greater than 1,320 U.S. gallons or a completely buried storage capacity greater than 42,000 U.S. gallons and there is a reasonable expectation of an oil discharge into or upon navigable waters of the U.S. or adjoining …
What do you do if you spill oil on the ground?
Just follow these steps:
- Sprinkle sawdust, clay kitty litter (not the clumping kind), coconut husks, or a commercial oil-absorbing product on the stain. …
- Allow the absorbent materials to work on the oil for 24 to 48 hours. …
- Repeat with fresh absorbent materials as needed to remove any remaining oil.