Should you red line an rx8?
If you DON’T periodically redline you will definitely have carbon choking problems, so redline regularly to be sure that you aren’t deliberately causing problems. Note that “redline” in this case is about 8,500rpm, and it means UNDER FULL THROTTLE.
What does a rx8 redline at?
6-speed manual with a claimed output of 232 hp (235 PS; 173 kW) at 8,250 rpm and 159 lb⋅ft (216 N⋅m) of torque at 5,500 rpm with a 9,000 rpm (redline limited) (Sold in North America).
Is it OK to hit redline?
However, there’s no need to worry. Redlining will not damage an engine or cause it to explode, no matter how cruelly you treat it. Therefore, revving the engine to its maximum speed several times a week is not a problem. Just remember never to do this while the engine is still cold!
How often should I redline rx8?
The redline once per day is a good rule of thumb to follow. “Not reving” won’t directly damage the seals, but carbon buildup in our engines is a recognized problem.
Does high rpm hurt engine?
Will High Rpm Damage The Engine? A high rpm can damage your transmission over time, even if it is extremely low or high loads. The high rpm also causes wear on the bearings and oil seals, which results in faster fluid breakdown.
Why do Rotarys rev so high?
The secret to the high revving nature of rotary engines lies in the fact that all of the moving parts are rotational rather than reciprocating. Stress and valve float become an issue when reciprocating masses are high, such as in pushrod engines with valves and pushrods constantly changing direction.
Is redline bad for engine?
Consistently redlining your car can cause serious damage to not only your tires, but also your engine. For those with manual-shift modes or manual transmissions, it can be quite easy to redline (whether on accident or on purpose) and eventually cause your engine to wear down prematurely.
How long should you let rx8 warm up?
about 5 minutes
Let engine warm up before driving it hard. You can drive it immediately after startup as long as you drive it gently, which means half throttle or less and 3000rpm or less until it warms up (about 5 minutes).
Are there any problems with the RX-8 Renesis engine?
The Rx-8’s 13B Renesis engine is not praised for its reliability. The 13B engine suffered from a number of major problems that frequently left it needing a fresh rebuild prior to even hitting the 100,000 mile mark. Here are the top 5 common Rx-8 engine problems: Apex seals are the weakest link of the 13B RX-8 engine.
What happens if you turn off your RX8 too early?
When an Rx8 is shut off too early in this cold start cycle, the engine can become flooded with gasoline. Essentially, there is a buildup of gasoline in the combustion chamber and there is too much gasoline for the spark plugs to be able to ignite the fuel and start the engine. Basically, your engine isn’t going to start.
What should I look for when buying an RX-8?
When you can’t afford, or can’t find a decent RX-7, you know you can always rely on an RX-8. As a former RX-8 owner myself, my advice is to remember these things before buying! 1. They must be kept above 3000rpm This is an absolute must.
Are there any problems with the 13B RX-8 engine?
The 13B engine suffered from a number of major problems that frequently left it needing a fresh rebuild prior to even hitting the 100,000 mile mark. Here are the top 5 common Rx-8 engine problems: Apex seals are the weakest link of the 13B RX-8 engine. The 13B rotary engine consists of two rotors which are shaped like rounded triangles.
https://www.youtube.com/watch?v=HwoiFYtxilA