How do you fix your washer when it says LF?
When “LF” is displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve.
How do you fix the LF code on a Samsung washer?
SAMSUNG WASHER FIX/SOLUTION: Check the fuse or reset the circuit breaker. Straighten the drain hoses. Eliminate kinked hoses. If there is a drain restriction, troubleshoot it.
How do you fix the LF code on a Kenmore Elite washer?
Unplug or turn the circuit breaker off for 30 seconds. Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet. Press the Pause/Cancel/Stop button twice to clear the display.
How do you clear the LF code on a Maytag washer?
However, you can clear the code once the washer is fixed by pressing the pause/cancel button twice and then pressing the power button once. Unplug the washer for one minute if the code doesn’t disappear after pressing the buttons. Then plug it back in.
What does lf mean on a Whirlpool Cabrio Platinum washing machine?
Long Fill
Cabrio Washer Fault Codes
| Fault Code | Washer Problem |
|---|---|
| LF (F30) | Long Fill |
| Ld (F32) | Long Drain |
| uL (none) | Unbalanced load |
| oL (F70) | Overloaded |
What does lf mean on my dryer?
An LF (Lint Filter) Error Code indicates that the HybridCare™ filter has been removed. Place filter into dryer and make sure the handle is properly seated.
Why is my Samsung washing machine not filling up with water?
The most common reason is a problem with the water supply, or a blocked or kinked water supply hose. In this situation, the washing machine will drain for 3 minutes and the power button will be inoperative. In this case, please clean the debris filter and mesh filter.
How do I clear the 4E code on my Samsung washer?
How to resolve 4E or 5E codes on Samsung Washer
- Check the water hose. A problem with the water supply is usually the result of low water pressure or a low flow rate on the mains water supply to the machine.
- Check the water supply.
- Clean the water hose mesh filter.
- Clean the dispenser drawer.
What is water inlet valve?
The water inlet valve on your washing machine is the part that connects the two water hoses to the machine, and it controls the flow of both hot and cold water. A problem with the valve can cause the washer to not fill properly or not fill at all.
What does lf mean on my Whirlpool dryer?
Lint Filter
An LF (Lint Filter) Error Code indicates that the HybridCare™ filter has been removed. Place filter into dryer and make sure the handle is properly seated.
What does LF on a Maytag washer mean?
too long to fill
If F8 E1 or LF (too long to fill) appears in display, the washer is taking too long to fill. It’s possible the drain hose extends more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation.