What is Cisco ASA group policy?

What is Cisco ASA group policy?

The Cisco ASA supports VPN filters that let you filter decrypted traffic that exits a tunnel or pre-encrypted traffic before it enters a tunnel. You can use the VPN filter for both LAN-to-LAN (L2L) VPNs and remote access VPN. VPN filters use access-lists and you can apply them to: Group policy.

What is a Cisco ASA tunnel group?

Tunnel groups are the part of EzVPN technology. When you configure your VPN this way you are allways providing group-name/password or certificate with mapping data to group. At the site to site (or lan to lan) VPN usually uses a crypto maps with IPSec profiles without tunnel groups.

What is WebVPN?

WebVPN allows a remote user to access Outlook Web Access, Citrix Workplace Environment (CWE), and other web-based applications from any computer with an Internet connection, with no requirement for additional software to be downloaded and installed to the remote machine.

How do I reset Cisco AnyConnect?

Start Services as soon as possible. You will find the Cisco Systems, Inc. entry in msc. You can reopen your VPN service from the context menu after right-clicking it and selecting Restart from the context menu to resume the service while allowing it to remain in use as required.

How do I delete a tunnel group in ASA?

To delete a tunnel group, you use the “clear config tunnel-group” command. Note: Before you delete it, make sure you know the pre shared key / shared secret – to see this, issue a “more system:running-config” command.

How do I use WebVPN?

To connect to WebVPN:

1. Acquire the URL for the VPN Plus web portal from the network administrator.
2. Enter the URL in the URL bar of your web browser.
3. Press Enter to connect to the VPN Plus web portal, and log in with your user credentials.

How do I fix authentication failed on VPN?

11 Ways To Fix The VPN Authentication Failed Error in 2022

1. Reboot Your Computer. Sometimes, the simplest solutions are the best.
2. Disable Your Firewall.
3. Try a Wired Connection.
4. Use a Different VPN Protocol.
5. Try an Alternate DNS Server.
6. Try a Different WiFi Network.
7. Connect to a Different VPN Server.
8. Reinstall Your VPN.

What is crypto mapping?

A crypto map is a software configuration entity that performs two primary functions: • Selects data flows that need security processing. • Defines the policy for these flows and the crypto peer to which that traffic needs to go. A crypto map is applied to an interface.

What are connection profiles and group policies in ASA?

Connection profiles and group policies simplify system management. To streamline the configuration task, the ASA provides a default LAN-to-LAN connection profile, a default remote access connection profile, a default connection profile for SSL/IKEv2 VPN, and a default group policy (DfltGrpPolicy).

How do I delete a default Group Policy from the ASA?

The ASA supplies a default group policy. You can modify this default group policy, but you cannot delete it. A default group policy, named DfltGrpPolicy, always exists on the ASA, but this default group policy does not take effect unless you configure the ASA to use it.

How does the ASA select the connection profile for a VPN?

In addition, for L2TP/IPsec clients only, when you specify the strip-group command the ASA selects the connection profile (tunnel group) for user connections by obtaining the group name from the username presented by the VPN client.

How does the ASA handle DNS queries that omit the domain?

The ASA passes the default domain name to the IPsec client to append to DNS queries that omit the domain field. When there are no default domain names, users inherit the default domain name in the default group policy.