Where is the OBD port Peugeot 208?
vehicle passenger compartment
The norm states that the port must be located inside the vehicle passenger compartment.
Where is the Peugeot 208 fuse box?
Fuse box location The fusebox 1 is located in the lower dashboard (left-hand side). Unclip the cover by pulling at the top right, then left, disengage the cover completely and turn it over. The fusebox 2 is located behind the glove box.
Where is the heater fuse on Peugeot 208?
The Peugeot 208 passenger compartment fan fuse is located, together with all other fuses, inside the fuse box. This is located inside the cockpit, under the steering column. It is only accessible by removing a part of the dashboard.
Where is the horn located on a Peugeot 208?
The horn sits at the front of your Peugeot 208 where grime and other small particles can build up over time.
How do you take the fuse out of a Peugeot 208?
Let’s see the replacement of the fuses on a Peugeot 208. We open the glove compartment under the dashboard, remove the cover placed in the dashboard next to the steering wheel (left side), then remove the damaged fuses in the compartment with a needle nose pliers.
How do you reset a Peugeot 208 window?
Hold the window button until the window reaches the top and then hold for another 5 seconds. 3. press button to send window down ,when fully down ,again hold for 5 seconds. Repeat this operation several times,then switch off ignition.
What does an Orange service light mean on a Peugeot 208?
This orange / amber symbol on the Peugeot 208 dashboard is to signify the engine will not start during engine Start and Stop mode. This is because the clutch is not fully depressed.
What does the spanner light mean on a Peugeot 208?
When the wrench warning light comes on on a Peugeot 208, the car wants to inform you that the time has come to carry out the service, so as to be able to guarantee correct operation of the mechanical parts.
Where is fuse box on Peugeot 308?
Dashboard fuse box Left-hand drive vehicles: the fuse box is located in the lower dashboard (left-hand side). Turn the screw a quarter of a turn to the left, unclip the cover by pulling the top right, disengage and pull away the cover, remove carrier on the back of which is fitted the tweezer.
Why is my Peugeot 208 screen not working?
If the touch screen of your Peugeot 208 no longer responds to commands, before replacing it you can try to disassemble it, clean the monitor contacts, remove the dedicated fuse and leave it disconnected for a while (so as to do a sort of Hard Reset ), or reset by pressing the menu key and “scroll” until you get a beep.