Where does the main drain go in a pool?
The main drain is the primary way that water is drawn from your pool into the pump and filter. The main drain is located on the bottom of the pool in the deepest part. Most pools have one, but larger pools may have multiple main drains.
How does a pool main drain work?
A pool’s so-called main drain is not actually a drain; that is, it is not used to drain the pool. Instead, it is an outlet, housing a pipe that runs to the pump, which sucks water through a skimmer, then through a filter, then through a heater (if you have one), and then back to the pool via multiple inlets.
Does main drain connect to skimmer?
Because the main drain is not tied into the skimmer in this set-up, pool systems using this configuration usually also have a separate valve to control a separate main drain line that runs from the pool to the pump.
Can I drain my pool into my yard?
Flooding Your Grass Is Not A Good Idea The problem with draining your pool in the yard, if permitted by your local water regulatory laws, is that it will quickly reach its saturation level and increase the risk of flooding your lawn, drowning the roots of your grass, and attracting mosquitoes.
How can I drain my pool without flooding the yard?
All you need is a medium-size water or vacuum pump.
- Unroll the pump’s intake hose so that it reaches the center of the pool (or as close to it as possible), and submerge it in the pool.
- Place the outlet hose so the exiting water doesn’t flood the area, but drains off away from the pool.
- Dry your hands thoroughly.
Should pool main drain be open or closed?
For proper water circulation, it is best to position the flap so that it is about 2/3 closed. This will allow for more flow through the main drain than through the skimmer, which will promote a “bottom-to-top” circulation throughout the pool.
Is a pool main drain necessary?
Main drains are not required in an inground swimming pool, however, they are strongly recommended and can be extremely useful in some circumstances. The advantages of main drains are to give you the ability to drain the water from your pool without the use of a sump pump. This is useful when replacing your pool liner.
Should the main drain on a pool be open or closed?
Should main drain in pool have suction?
The main drain for a pool is a suction port that should be located at the deepest point on the pool floor. A main drain is responsible for aiding in the circulation and filtration of the pool water. Having a properly working and dedicated main drain line can also allow you to fully drain your pool if necessary.
How often should I drain my aboveground pool?
Is the pool floor visible from the surface? As long as you can see the floor of your pool then your water is clean and safe—you don’t really need to
How often should in ground pool water be drained?
The pool can heave out of the ground
How to drain an inground pool with a main drain?
draining pool – Shut off any input ports that are above the current water line – these may include the skimmer and the suction cleaner port – so that you will not be sucking air into your system. Only pull water in from the main drain on the bottom of the pool. Fill the main drain line through the pump basket for five minutes.
How to quickly drain an Intex pool?
– One hose drain plug connector – Ideal for draining the water in your pool – Intex model part number 10184 – Fits all Intex Wet Set pools as well as all Sand N Sun pools manufactured by Intex.