What sizes do trailer axles come in?
How to Identify Capacity of Dexter Axle by Measuring it The diameter of it is a pretty good way to determine the capacity. – 1,000-lb – 2,000-lb Axles: 1-1/2 inch – 1-3/4 inch diameter – 3,500-lb Axles: 2-3/8 inch diameter – 6,000-lb – 7,200-lb Axles: 3 inch diameter – 8,000-lb Axles: 3-1/2 inch diameter…
What are the different types of trailer axles?
Trailer axles are normally divided into two different types: Spring axles and torsion axles. While these two types of axles perform the same basic job, the way they go about suspending and cushioning the trailer load is completely different.
How much does a 40ft flatbed trailer weigh?
40 Foot flatbed trailer weight: 7-9 ton.
How many axles does a trailer have?
When fully attached to a trailer, a semi-truck technically has five axles. If you’re not attached to a trailer, a semi-truck technically has three axles. With that being said, there are many different types of semi-truck axle trailers, and the number of axles your semi-truck has when attached could vary.
Are all trailer axles the same?
In almost all cases 3,500 lb axles will all use the same bearings. If your trailer has a Lippert or Dexter 3,500 lb axle then yeah they would be the same.
What is trailer axle weight?
Gross Axle Weight Rating (GAWR) is the most distributed weight the axle of a vehicle can support. Typically, the GAWR will include FR to indicate front axles or RR to indicate rear axles. Gross Vehicle Weight Rating (GVWR) is the most weight allowed of both your trailer and cargo.
What is axle trailer?
In the most basic terms, the axle is a shaft that transfers the trailer weight and drive to the wheels. This simple-sounding shaft, though, may be the most complex part of the trailer.
What should I look for when buying a trailer axle?
Generally speaking, look for trailer axles with more capacity than you need. Also, be sure to match springs and tires, because the real capacity is the lesser of Axle Capacity, Spring Capacity, or Tire Capacity. Don’t get caught short. For this discussion, Mounting Position means the measured location where axle connects to the trailer frame.
How much weight can a 6×14 trailer hold?
Build a great tandem axle, heavy duty utility trailer from these 6×14 trailer plans. Blueprints are fully engineered for 12,000 lb. total capacity. The trailer you build will be tough and ready to work.
What is the axle spacing for a trailer?
For Multiple Axle trailers, the distance from axle centerline to axle centerline is the axle spacing. See the side view dimension illustration above. While mounting hardware has an effect, Spring Length will largely dictate the axle spacing. Some standards exist, like 33″ or 35″.
What is a torsion style trailer axle?
Torsion style trailer axles handle the drop a little different. A rise or drop happens by setting the no-load Arm Start Angle. When that angle is ‘UP’, then it accomplishes a small “drop”. Conversely, if the angle is down, it’s like giving the trailer a “lift”.