What is the density of G-10?
1.80 g/cc
| Physical Properties | Metric | English |
|---|---|---|
| Density | 1.80 g/cc | 0.0650 lb/in³ |
| Water Absorption | 0.10 % | 0.10 % |
| Mechanical Properties | Metric | English |
| Hardness, Rockwell M | 110 | 110 |
What kind of material is G-10?
fiberglass sheet laminate
G10 is a fiberglass sheet laminate, a kind of composite material created by stacking multiple layers of glass cloth, soaked in epoxy resin, and then compressing the resulting material under heat until cured.
What resin is used in G-10?
epoxy resin
G10/FR-4 is a composite material that consists of glass fabric, electrical grade epoxy resin. The material is extremely strong and stiff, has a low coefficient of thermal expansion, and outstanding electrical properties. G10/FR-4 is widely used as an insulator for electrical and electronic applications.
Is G-10 the same as FR4?
The difference between G10 and FR4 is that FR4 is a fire-retardant grade of G10. FR4 can be safely substituted when G10 is called out, while G10 can never be substituted where FR4 is called for. Melting Point, (VS=Vicat Softening Temp.) Continuous Service Temperature in Air, (Max.)
Is G-10 a thermoplastic?
G-10 FR-4 is a thermosetting industrial fibre glass composite laminate consisting of a continuous filament glass cloth material with an epoxy resin binder.
What is G-10 phenolic?
Phenolic G-10/FR4 is a continuous woven glass fabric laminated with an epoxy resin. This grade is extremely high in mechanical strength, has low water absorption and dissipation factors and has superior electrical characteristics, which are exhibited over a wide range of temperatures and humidities.
Is G10 a strong material?
G10 kitchen knife handles are very durable with a very high level of strength, meaning they will last for a very long time even under heavy use in both wet and dry conditions. G10 is also commonly used for underwater applications due to its strength, durability, and highly water-resistant properties.
What is carbon fiber G10?
G10 is a composite material, made by layering sheets of epoxy-soaked glass cloth, then compressing the layers together under extreme heat and high pressure until the layers fuse and the epoxy cures.
What are the properties of G10 glass epoxy?
G10 Glass Epoxy Material Properties Properties Bond Strength, in lbs. 2,000 Coefficient of Thermal Expansion cm/cm- 0.9 Water Absorption 0.62″ thick % per 24 hrs = 0.25 0.125″ thick % per 24 hrs = 0.15 Dielectric Strength, volt/mil perpendicu 0.62″ thick = 450 0.125″ thick = 350
What is G10 FR4 material?
G10/FR-4 is a composite material that consists of glass fabric, electrical grade epoxy resin. The material is extremely strong and stiff, has a low coefficient of thermal expansion, and outstanding electrical properties. G10/FR-4 is widely used as an insulator for electrical and electronic applications.
What is G10 fiberglass used for?
Is a fiberglass epoxy laminate usually specified when extremely high strength and consistent dimensional stability over tem- perature is required. G-10 is used for terminal boards, high humidity applications, electrical and electronic test equipment and electric rotor insulation.
What is the fire retardant grade of G10 epoxy resin?
FR4 is the fire-retardant grade of G10. See the charts below for G-10 and FR4 material properties. Contact a Dielectric Manufacturing knowledge expert to discuss the use of G10 and FR4 epoxy resins for fabrication of your parts. Call 800-367-9122 or email [email protected].