What is SAE 30r14t1?
SAE J30R14T1 is the standard for ultra-low permeation properties. This type of hose is typically approved for use with leaded and unleaded gasoline, diesel, biodiesel, E85, methanol, ethanol and gasohol fuels. These are typically used for low-pressure applications.
What is SAE j30r7?
Application. A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line. Specific Fuel. Unleaded gasoline, diesel fuel, gasoline blends of ethanol (E-10), E85 and sour gas.
What is the ID of 3/8 fuel line?
Part Number: 555-15996. 3/8 in. I.D.
What is fuel injection hose?
Fuel-injection hoses are suitable for conveying fuel to fuel-injected engines. The hoses’ cover resists damage from abrasion, oils, heat, and ozone. The hoses are designed to provide low permeation and minimal fuel vapor loss.
What is SAE fuel line?
This SAE standard covers fuel, oil, or emission hose for use in coupled and uncoupled applications, for use with gasoline, oil, diesel fuel, lubrication oil, or the vapors present in either the fuel system or in the crankcase of internal combustion engines in mobile or stationary applications.
What PSI is fuel injection hose?
Regular Fuel Line: PSI. Fuel injection hoses must be able to take air pressure of at least 50PSI. However, an SAE 30R9-rated fuel injection hose would be able to withstand 100 PSI. A PTFE hose with AN6 can take pressure up to 2500 PSI.
What is NBR fuel line?
Nitrile Rubber (NBR) The acrylonitrile content of nitrile sealing compounds varies considerably—from 18% to 50%—which influences the physical characteristics of the finished material. Of all the types examined here, Nitrile Rubber (NBR) has the best oil resistance, making it the ideal choice for a fuel transfer hose.
How much pressure can 3/8 fuel line?
Continental 65153 3/8″ ID Fuel Injection Hose – Max 100 psi – SAE 30R9 – 25′ Length.
What are fuel line sizes?
Recommended Size, Based on Horsepower
| Recommended Fuel Line Size (from the tank to the pump) | ||
|---|---|---|
| Engine Output | Size (inches) | Size (AN) |
| 350 hp or less | 5/16 in. | -5 |
| 350-450 hp | 3/8 in. | -6 |
| 450-650 hp | 1/2 in. | -8 |
Can I use regular fuel line on fuel injection?
Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone and heat and can be used for ethanol-laced fuels and diesel fuel. It should, however, not be used on coolant systems, oil systems or fuel-injection systems that produce pressures higher than 50 psi.
Where is fuel line in a car?
Fuel lines are made of durable metal, plastic materials and though they are located in the undercarriage of the vehicle, and seemingly in a vulnerable position, they are placed in areas that cannot be damaged due to elements, road conditions, or exposure to heat from the engine’s exhaust or other components.