How do you test 5800CO?
Use a small, thin object to press and hold the test button on the 5800CO. A thumbtack, toothpick or paperclip should work nicely. You must press and hold the recessed test button for at least two (2) seconds for the sensor to activate. This should cause an alarm on the system.
Do alarm systems have carbon monoxide detectors?
Most hardwired CO detectors for alarm systems are 4-wire devices that use two wires for power and two wires for data transmission. The sensor will automatically reset itself once CO gas exits the detection chamber.
How do you turn off a Honeywell carbon monoxide alarm?
A chirping Honeywell carbon monoxide detector can be silenced for 24 hours. Just press the Test/Hush button once. Pressing that button twice will reset the 24-hour period. However, your unit won’t stop chirping until you’ve resolved the issue that’s causing it.
How can I get a free carbon monoxide detector?
One of the most common ways to get a free carbon monoxide detector is through community programs. Cities and counties often have free smoke and carbon monoxide detectors available, typically through the fire department.
What is the Honeywell 5800co?
The 5800CO is a 3V battery powered wireless carbon monoxide (CO) detector intended for use with Honeywell Home alarm systems that support 5800 Series wireless devices. It provides early warning when its electrochemical sensing technology measures carbon monoxide levels in the air.
Is the 5800co a system supervised detector?
The 5800CO is specifically designed for system operation and is fully listed to UL 2075 as a system supervised detector.* It contains a piezoelectric horn which generates the ANSI S3.41 temporal 4 pattern in an alarm condition.
When should I replace the co sensor on my 5800co?
This indicates that the CO sensor inside the detector has passed the end of its life and the detector needs to be replaced. The detector’s lifespan is approximately six years from the date of manufacture. Full Supervision – The 5800CO is fully supervised to monitor for low battery, case tamper and trouble conditions.
How high off the wall should a 5800co be mounted?
The 5800CO should be mounted on the wall at least as high as a light switch and 6″ from any ceiling or wall if mounted on a wall. If mounted on a ceiling, the carbon monoxide detector must be further than 12″ from any wall.