TheGrandParadise.com Mixed How do you clear the error code on a Hoover washing machine?

How do you clear the error code on a Hoover washing machine?

13/07/202213/07/2022| Shirley GriffinShirley Griffin| 0 Comment | 12:00 AM
Categories:

How do you clear the error code on a Hoover washing machine?

How to Diagnose and Fix a Hoover E03 Error Code

  1. Remove the drain filter and rinse it to clean it.
  2. Check the drain pump and remove any blockages.
  3. Check that the drain hose is clear of obstructions.
  4. Check the wiring to the drain pump.
  5. Check there is no blockage in the drain pipe.

How do you manually unlock a Hoover washing machine?

Simply plug the product back in or restore the power and then switch off the appliance using the button on the control panel. The door will now unlock.

What does 56y mean on a Hoover washing machine?

This is normal and indicates the product is in standby mode.

What does E07 mean on a washing machine?

Error code E07 means there is a problem with either the washing machine door lock, or the motor. (In some models error code E01 will be displayed if there is a door lock fault.)

What does Error 2 mean on a Hoover washing machine?

Error code 2 warns that the machine has not filled up with water within 6 minutes, this may be that the water pressure in your home is low.

What does E07 mean on a Hoover washing machine?

How do I fix the e21 on my bush washer?

This error may be caused by a blockage occurring in the coin trap or in the drain line.

  1. Check and clean the coin trap. The Coin Trap can collect small objects from the wash cycle.
  2. Check the drain line to make sure that it is not crimped or twisted in a way that prevents or inhibits water flow.

What does E16 mean on Hoover washing machine?

Heater Insulation Issue
Heater Insulation Issue: Hoover Washing Machine Error Code E16 – If your washing machine is showing a E16 error on the digital display or the power light flashes sixteen times before pausing and repeating, it’s likely the machine is having a problem with the water heater.

How do you fix an E02 error on a Hoover washing machine?

You may need to call a plumber to repair the tap if it is seized or broken. If you are unsure that water is coming out of the hose a good way to check is by turning the tap off, disconnect the hose and place in a bucket and then turn the water back on. Water should flow into your bucket.