How do I default ProCurve switch?

How do I default ProCurve switch?

To execute the factory default reset on the switch, perform these steps:

1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to blink, release the Clear button.

How do I reset my HP ProCurve password?

Solution: You can clear the switch password by pressing the recessed Clear button on the front of the switch. This action deletes all password and user name protection from all of the switch’s interfaces.

How do I reset my HP ProCurve 5406zl?

When resetting a Switch 5412zl, 5406zl, 3500yl-24G, or 3500yl-48G to factory default settings, the “Clear” button must be depressed for approximately 25 seconds. For all other switches, the Clear Button is held for no more than 5 seconds. Release the Clear button.

How do I factory reset my ProCurve 2510?

How to reset a ProCurve 2510-24g to default settings

1. Press in both the Clear and Reset buttons (tiny buttons on the left edge)
2. Release the Reset button after the port lights come on (~2 seconds)
3. When the Self-Test LED starts flashing (to the left of the Clear and Reset buttons), release the Clear button.

How do I factory reset my HP ProCurve 2626?

Factory Reset When enabled, the switch can be reset to factory defaults by depressing the “Clear” and “Reset” buttons together, releasing the “Reset” button while holding the “Clear” button down, and releasing the “Clear” button as soon as the “Test” light begins to flash rapidly.

How do you reset a ProCurve 1800 24g?

How do I reset factory defaults on the ProCurve 1800 Series Switches?

1. Remove the power cord from the back of the switch.
2. Connect port 1 to port 2 on the front panel, using a standard network cable.
3. Reconnect the power cord to the rear of the switch.
4. Wait at least 40 seconds before disconnecting port 1 from port 2.