Who makes faultless door locks?

Who makes faultless door locks?

FAULTLESS Trademark of Taiwan Fu Hsing Industrial Co., Ltd.

Are door knobs universal size?

While door knobs commonly come in standard measurements, they aren’t universal. Standard-sized door knobs have a better fit with most modern doors because they follow this standard. On older doors, they most likely won’t fit because the doors have smaller measurements.

What sizes do door knobs come in?

The standard size for a door knob diameter is either 2 3/8 inches or 2 3/4 inches and these knobs will usually fit doors that are anywhere between 1 3/8 inches to 1 3/4 inches thick.

Are Kwikset door knobs interchangeable?

Builders and homeowners can mix and match the levers and deadbolts for a unique pairing of modern hardware.

How do you separate a doorknob?

If you find a slot, insert the flat-head screwdriver and push the detent to release the knob. If you find a small hole, use a straightened paperclip or other firm wire to spring it. If dealing with a recessed hex-head screw, turn it counterclockwise with an Allen wrench until the knob is free.

What is the standard size hole for a door knob?

2 1/8″
Standard Door Prep for Door Knobs & Levers: The standard sized bore hole is 2 1/8″ in diameter. Through the edge of the door there is a 1″ cross bore that extends from the edge of the door through the bore hole. (This cross bore is where the latch is installed).

Are Schlage and Kwikset Handlesets interchangeable?

You can change about 90% of the Schalge lock cylinders from Schlage to Kwikset, and about 10% of the Kwikset lock cylinders are able to be changed at all.

Can you unlock a door by taking the handle off?

Depending on the design, you may have to either pull out or slide the handle off the spindle. With one side of the mechanism exposed, use a screwdriver to push the other side of the knob from the door. Screw in the screwdriver into the spindle’s hole and then turn it clockwise to release the latch from the door strike.