What size bearing is L44649?
DIMENSIONS
| d | 26.988 mm | Bore diameter |
|---|---|---|
| D | 50.292 mm | Outside diameter |
| T | 14.224 mm | Total bearing width |
| d1 | ≈ 39.6 mm | Inner ring shoulder diameter |
| B | 14.732 mm | Width inner ring |
What seal goes with L44649?
The seal part most often used with inner/outer bearing L44649 is seal part # 10-9 which has an inner diameter of 1.50-inches and an outer diameter of 1.987-inches so bearing kit # BK1-150 that you referenced should do it.
Can you replace the bearing and not the hub assembly?
Your wheel bearing may have been damaged slightly in the past and has now worn to the point it is starting to make noise. Your mechanic is correct in that the only repair for the bearing is to replace the hub. It is a sealed unit and cannot be disassembled without destroying it.
What size is a L68149 bearing?
L68149/L68110 Timken Tapered Roller Bearing 1.3775×2. 3280×0. 6250 inch
| Dimensions – d (inside diameter) | 34.989mm |
|---|---|
| Dimensions – D (outside diameter) | 59.131mm |
| Dimensions – B (width) | 15.875mm |
What seal goes with bearing L68149?
Expert Reply: When the L68149 bearing is paired with the L68111 race, the 10-19 grease seal is used. However when the same bearing is used with the L68110 race on a boat trailer, the # 168233 seal is usually used.
How do I know my hub size?
Hub Flange Diameter – The distance across the hub’s flange from hole to hole….Here’s how to measure these distances:
- Figure out the distance between the lock nuts (where the hub sits in the dropouts) – 100 or 110 mm is typical for the front.
- Take that number and divide by 2.
- Then measure from the flange to the lock nut.
What size bearing does a 3500 lb axle?
3500 lb axles have the most common and most consistent spindle sizes. They are typically 1.73 inches at the seal, 1.38 inches at the inner bearing and 1.06 inches at the outer bearing like # TRU24FR.
Should you replace both hub bearings at the same time?
Both wheel bearings have racked up the same number of miles, so it’s logical to conclude that both sides have probably experienced the same amount of wear. Based on this line of thinking, it would make sense to recommend replacing both wheel bearing hubs at the same time even though only one has obviously failed.
What is #84 spindle?
A #84 spindle, like # TRU24FR or # TRU47FR is bigger and is used for 3,500 lb axles. Common sizes for these are 2-3/8 inch round axle, 3 inch round axle, and 2 inch square axle.
What size bearing is L68149?
Is there a bearing with the l44640 number?
I may have a solution for you, but I’m not aware of a bearing that has the L44640 number. However, the Replacement Trailer Hub Bearing – L44649 # L44649 is a fairly common bearing found in trailer hubs and has an inner diameter of 1.063″.
How to order replacement part for l44649 trailer hub bearing?
Replacement Trailer Hub Bearing – L44649 part number L44649 can be ordered online at etrailer.com or call 800-298-1624 for expert service. Why etrailer? High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number. High-quality, tapered roller bearing is designed for high-speed use.
What are the specs of a l68149 hub?
Replacement hubs that have these specs typically use a # L68149 inner bearing and # L44649 outer bearing, as well as inner race # L68111 , outer race # L44610 and grease seals with inner diameter of 1.719″ and outer diameter of 2.565″. You’ll want to verify that your current hubs have these bearings, races and seals to ensure that a
Where to buy replacement trailer hub bearing parts?
Replacement part uses industry-standard number. Lowest Prices for the best trailer bearings races seals caps from etrailer. Replacement Trailer Hub Bearing – L44649 part number L44649 can be ordered online at etrailer.com or call 800-298-1624 for expert service.