What is the safety of life at sea conventions means?
The International Convention for the Safety of Life at Sea (SOLAS) is an important international treaty concerning the safety of merchant ships. It ensures that ships registered by signatory States comply with minimum safety standards in construction, equipment and operation of ships.
What is Article 3 in the International Convention for the Safety of Life at Sea 1974?
Chapter III – Life-saving appliances and arrangements The Chapter includes requirements for life-saving appliances and arrangements, including requirements for life boats, rescue boats and life jackets according to type of ship.
What is the purpose of 4 pillars of IMO?
With the key goals of improving safety to ships, their operation and lives that sail upon them, in addition to improving the protection of the marine environment from pollution caused by routine operations and accidental damage, four key Conventions have been put in place to mandate requirements and standards …
Which Convention replaces and abrogates the International Convention for the Safety of Life at Sea which was signed in London on 17 June 1960?
“(a) As between the Contracting Governments, the present Convention replaces and abrogates the International Convention for the Safety of Life at Sea which was signed in London on 17 June 1960.
What is safety of life on board?
Contributor. SOLAS (Safety of Life at Sea) is the shorthand term used to refer to an international treaty that creates standards of safe construction and operation of both passenger and merchant ships.
What is the purpose of MLC 2006?
The Maritime Labour Convention, 2006 (“MLC, 2006”) establishes minimum working and living standards for all seafarers working on ships flying the flags of ratifying countries.
What are the 3 main safety concern of the IMO?
The major areas of concern, which the International maritime organization has been able to bring under regulation, have been the prevention of accidents, setting up safety standards for ships and other vessels (including design and materials) for the member states to abide by, maintaining adherence to the established …