What is the frame around an exterior door called?

What is the frame around an exterior door called?

The frame (sometimes called a jamb) is made up of three separate pieces and surrounds the door creating a “frame” in which the door can sit. The two vertical frames are called side jambs, and the horizontal frame is referred to as the head jamb. Frames are made up of composite material or solid wood.

What is the standard exterior door jamb depth?

4-9/16″
Measure the Frame: Measure the depth of the door frame, or jamb. This measurement is to tell you how thick the wall is so it should not include the interior trim or casing, or siding and any trim pieces on the exterior of the door. The most common frame depths are 4-9/16″ or 6-9/16″.

What are the parts of a door jamb called?

The top horizontal section of a door or window frame is called the head jamb. A door jamb is an individual section of a door frame. Two side jambs make up the vertical components of the door frame and the head jamb is the top horizontal component. Together, the jambs (along with mullion) comprise the door frame.

How do you make a door jamb for an exterior door?

Here’s what to do:

  1. Measure the height and width of the door using the tape measure.
  2. Cut two studs to the height that you measured, using the electric saw.
  3. Cut one stud to the width of the door and place it on top of the door opening.
  4. Nail one door jamb to the wood frame you built, on the hinge side.

What are the parts of an exterior door?

Parts of a Door

  • Doorway. A doorway is one of the easiest parts of a door to see.
  • Door Frame. A door frame is what supports the door and consists of the head, jamb and sill.
  • Head or Door Head. The door head is a horizontal section of the door frame that is located at the very top.
  • Door Panel.
  • Jamb.
  • Sill.
  • Threshold.
  • Rail.

What is an architrave around a door?

Architrave conceals the joint and any shrinkage or movement that may occur between the wall and the casing within the door surround.

Are door jambs structural?

The door jamb is one of the most visible door pieces — so much so that people sometimes confuse it with the frame itself. However, behind the jamb and inside the wall, the structural, hidden part of the door frame is an important part of the door anatomy.

Do you need a door jamb?

Locking and Protection. A strong door jamb provides a desirable sense of protection against burglary and theft. While one may believe the type of door or the quality of the locking system to be most essential, without a strong jamb, neither will matter.

What are the parts of a door hinge called?

Most hinges consist of three basic parts: leafs, a knuckle and a pin. Leafs are the rectangular-shaped plates on the sides of a hinge. A knuckle is a cyldrical-shaped tube that’s created when the leafs are joined together. A pin is a solid metal rod that’s inserted through the knuckle to interlock the leafs.