What is the ball end of an Allen wrench used for?

What is the ball end of an Allen wrench used for?

The ball end makes it easier to slide the key into the receiving slot. It allows you to reach at an offset 30 degree angle so that you can feel your way to the needed position much faster – great for blind or difficult areas to reach or if the bolt or screw is close to an obstruction on one side.

Is a Allen wrench and an Allen key the same thing?

A hex key, also known as an Allen key or Allen wrench, is a small handheld tool that’s used for for driving bolts and screws with a hexagonal socket. They are available in many different sizes, though they all have the same hexagonal-shaped tip.

What to use when you can’t find an Allen wrench?

Socket Wrench or Ratchet Wrench If you have one that will fit in the hex screw hole or hexagonal socket you are working with, a socket wrench may come in handy in place of an Allen wrench.

What is the difference between hex key and Allen wrench?

The short answer is “there is no difference”. Really, these two names can be used interchangeably.

How do you measure Allen key size?

Hex keys are measured across-flats (AF), which is the distance between two opposite (parallel) sides of the hexagon….Metric sizes

1. 0.7, 0.9, 1.0, 1.25, 1.3, 1.5.
2. 2 to 6 in 0.5 mm increments.
3. 7 to 22 in 1 mm increments.
4. 24, 25, 27, 30, 32, 36, 42 and 46 mm.

Are Torx and hex the same?

Torx keys at first glance look very similar to hex keys. However, Torx keys have a six-pointed star-like shape, instead of the six flat sides of a hex key.

What is the size of a 17mm hex ball end?

End Type Ball End System of Measurement Metric Arm Style Long Arm Hex Size (mm) 17.00 Overall Length Range 7″ – 9.9″ Overall Length (Inch) 9-11/16 Additional Information L-Key Long Arm PSC Code 5120 In Stock Added to Cart 17mm Hex, Long Arm, Ball End Hex Key

What is a ball end screwdriver key?

These assorted keys have a ball-end tip with a retaining ring that grips inside the recess to hold screws in place and allows angled entry to turn fasteners in hard-to-reach areas. When you don’t have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

What is an end key on a hex screw?

Hex end keys are used to apply more torque to the hex screw and reduce the possibility of being stripped. The chamfered tool tips eliminate burrs and help tools seat in screw head. End Type Hex End System of Measurement Metric Arm Style Long Arm Hex Size (mm) 17.00 Overall Length Range 10″ and Longer Overall Length (mm) 280.00 Overall In Stock

How long is a 17mm long arm Hex end?

End Type Hex End System of Measurement Metric Arm Style Long Arm Hex Size (mm) 17.00 Overall Length Range 10″ and Longer Overall Length (mm) 280.00 Color In Stock Added to Cart 17mm Long Arm Hex Key