What is a PAC SWC interface?
PAC Audio SWI-RC Universal Steering Wheel Interface The PACSWIRC interface allows you to use the factory steering wheel controls in a wide range (250+) vehicles to command most major branded aftermarket radios. Allows retention of your steering wheel controls including factory phone buttons where applicable **
How do I program my SWI cp2?
Press and hold the programming button on the side of the interface until the LED illuminates green. Release the programming button. 3. Within 7 seconds, press the button that is to be learned on the steering wheel.
How do I reset my PAC SWI-RC?
A. The interface can be reset, when not connected via USB, by pressing and holding the programming button on the side of the interface for seven seconds until the LED turns amber. This reset can only be done while the module is connected to the vehicle. Q.
How do I reset my SWI-RC 1?
A. The interface can be reset, when not connected via USB, by pressing and holding the programming button on the side of the interface for seven seconds until the LED turns amber. This reset can only be done while the module is connected to the vehicle.
How do I install SWI-RC 1?
Installation is simple and easy, just go to the web based SWI-RC-1 Installation Guide from your PC, MAC or Mobile Device, select the make/model/year and radio brand you are installing, set the DIP switches, and wire it up according to the clear and concise information provided.
What is a SWC 3.5 mm jack?
SWC Interface Wiring There are two wires used for steering wheel controls. Each interface (either stand-alone or as part of a multi-function product) has one blue/yellow wire and one black wire with a stereo-type 3.5mm plug. Both wires accomplish the same purpose: transfering the SWC signals to the radio.
What is a SWC harness?
Aerpro Steering Wheel Control Harness (SWC) adapters allow use of a vehicles factory steering wheel audio controls with an aftermarket source unit by converting the commands to a code that an aftermarket head unit can recognize.
What is the PAC SWI-X interface?
The PAC SWI-X interface has got you covered! This universal adaptor allows you to use the steering wheel controls in over 90 % of all vehicles. The SWI-X is easy to program using the factory controls and the head unit’s remote control. During programming, step-by-step LED confirmation will guide you.
What year did the steering wheel control interface come out?
Steering Wheel Control Interface Year (s) Model 1996-2004 CL 2013-2014 ILX 1992-2001 INTEGRA 1992-1995 LEGEND
How do I program the SWI-X to my Receiver?
The SWI-X is easy to program using the factory controls and the head unit’s remote control. During programming, step-by-step LED confirmation will guide you. Once connected, the SWI-X’s memory will learn up to 12 functions from your receiver’s wireless remote, retaining them even if the battery dies.
What radios are not compatible with the swi-cp5?
If the radio does not have a wired remote input, you will need to use the SWI-X. Not compatible with Kenwood models: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798. These models must be used with the SWI-CP5. Pioneer AVIC-Fxxx radios do not interpret radio preset-seeking commands. This is a limitation of the radio, not the SWI-RC.