What is a FAA Form 8130-3 used for?

What is a FAA Form 8130-3 used for?

The FAA encourages the use of FAA Form 8130-3 for documenting the airworthiness status of FAA-approved products and articles. This will help provide traceability and ease the movement of products and articles throughout the aviation system.

What requirements must a part meet to be considered approved according to the FAA?

NOTE 1: Parts, which have been maintained, rebuilt, altered, or overhauled, and approved for return to service in accordance with parts 43 and/or 145, are considered to be “approved parts.” Parts that have been inspected and/or tested by persons authorized to determine conformity to FAA-approved design data may also be …

What is an FAA exemption?

Exemptions are generally viewed as alternative methods of complying with a regulatory requirement. The FAA issues exemptions only upon a finding that such action will be in the public interest. See FAA Order 8900.1, Volume 3, Chapter 2, Section 1 for additional information.

What is an FAA ODA?

The Organization Designation Authorization ( ODA ) program is the means by which the FAA grants designee authority to organizations or companies. The regulations addressing the ODA program are found in Title 14 of the Code of Federal Regulations (14 CFR ) part 183, subpart D, sections 183.41 through 183.67.

What are the three levels of the FAA?

14 CFR Part 21 defines three separate certifications: type, production, and airworthiness.

What is FAA approved?

It is an approval by the Administrator, through an authorized Aviation Safety Inspector (airworthiness), of technical data and/or installations used to accomplish a major repair or major alteration.

How do I apply for FAA exemptions?

Petition for Exemptions

1. Your name and mailing address.
2. The specific section or sections of Title 14 of the Code of Federal Regulations ( CFR ) from which you seek an exemption.
3. The extent of relief you seek and the reason you seek the relief.
4. How your request would benefit the public as a whole.

What is an FAA deviation?

here’s how the FAA defines a pilot deviation: the actions of a pilot that result in the violation of a Federal Aviation Regulation or a North American Aerospace Defense Command Air Defense Identification Zone (ADIZ) tolerance.

What is FAA Form 8130-3?

When requested on FAA Form 8120-10, Request for Conformity, FAA Form 8130-3 is used to ship a prototype product or article.

What if my CAA is unable to answer my form 8130-3 question?

If your CAA is unable to answer your question regarding the FAA Form 8130-3, the CAA will contact the FAA through proper channels for guidance. Only CAAs may contact the FAA directly.

What block is 8130-3 for domestic airworthiness approval?

Block-By-Block Instructions for Completing FAA Form 8130-3 for Domestic Airworthiness Approvals. a. Block 1. Approving Civil Aviation Authority/Country.

What does block 14A mean on FAA Form 8130-3?

d. Blocks 14a through 14e on FAA Form 8130-3 are used to indicate approval for return to service (along with the information contained in Blocks 1 through 12). e. FAA Form 8130-3 must be completed as outlined in the Block-by-Block instructions in paragraph 3-6 of this order.