How do I flash my galaxy S3 with Odin?

Process to flash stock ROM via ODIN on Samsung Galaxy S3

Install ODIN and open it.
Disconnect your device from your PC.
Put your galaxy s3 in download mode, hold (Volume down + Home + Power), then press volume up.
Connect your galaxy S3 into to your PC and wait for Odin to recognize it.

What does Odin mode Samsung do?

Odin is a utility software program developed and used by Samsung internally which is used to communicate with Samsung devices in Odin mode (also called download mode). It can be used to flash a custom recovery firmware image (as opposed to the stock recovery firmware image) to a Samsung Android device.

What is odin3?

Odin is a Windows-based program that automates the process of flashing firmware to Samsung’s Android-based devices. It’s not intended for consumers: the tool is meant for Samsung’s own personnel and approved repair centers.

How to download Odin 3?

Download the Odin3 installer file from the link above.

Save the downloaded file to your computer.

Double-click on the downloaded Odin3 installer file.

Now,a smart screen might appear and ask for a confirmation.

Click “Yes” to confirm.

Finally,follow the installation instructions until you get a confirmation notification of a successful installation process.

How to flash all Samsung devices with odin3?

Flash Samsung Stock ROM (Official/Original Firmware) via Odin. Step 1: Download and install device driver software on your computer. If you have used Kingo android Root already, skip this step. Otherwise, do it manually.

How to use odin3?

– Download the patched version of Odin and extract the Zip file on your desktop. – Download and install the latest Samsung USB Driver on your Windows PC and reboot your system. – Open the Odin folder and launch Odin3.exe as an administrator. – It’s time to boot your Samsung device into the Download Mode. – Connect your device to the computer using a compatible USB cable. – When your phone or tablet is recognized by Odin, the ID:COM port will be highlighted. – Click the Options tab in Odin and make sure that only the Auto Reboot and F. Reset Time options are enabled there. – Then click on the AP button and add the Samsung combination file you created earlier. – Finally, click the Start button to trigger the installation. – Wait until the combination firmware installation finishes and you are greeted by the PASS!! message in Odin. Your Samsung Galaxy device will reboot automatically.

How to manually update your Samsung phone with Odin?

Rename the downloaded .bin package to update.zip and copy it to the root directory of your SD card.

Now reboot to the recovery mode,navigate to the option apply update from external storage,and press the Power button to select it.

Now select the file named update.zip in a similar way.

The update will start.

https://www.youtube.com/watch?v=lz-1sniInLM