How do I fix my Canon iP2770 printer not responding?

Turn off the printer while also disconnecting the connector attached to it. Unplug all of the cords. Wait for a couple of seconds before connecting them again. Turn the printer on and hopefully, it should respond just fine.

How do I fix error code 5B00?

How to fix Canon printer error 5b00

Step 1: Unplug the device.
Step 2: Press down and continue to hold the power button of the printer and plug the power cord into the wall socket.
Step 3: Hold the power button until the printer starts resetting itself.
Step 4: Wait for the green power light in the printer to turn off.

How do I reset my Canon ip2772 printer?

How to Reset Canon ip2772 using Resetter Tool

Power off Your printer.
Press and hold the reset button.
Press and preserve the power button.
Now release the reset button.
Press and open the reset button five times.
Now Release electricity button, Printer On carrier mode circumstance.

What does blinking light on Canon mean?

If the lamp on the ink tank is flashing, ink may have run out. Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, press the RESUME / CANCEL button with the ink tank installed. Then printing can continue.

Why is my wireless Canon printer not printing?

If there have been no changes to your wireless network (new router, new password for your router, etc.), turn off and unplug your printer. Unplug your wireless router for 15 seconds, then plug it back in. After it has fully initialized, plug the printer back in and power it on. Try to print again.

Why is my Canon printer connected but not printing?

The key factors for the issue Canon Printer Won’t Printing are: the print jobs stuck in printer queue, the paper jams disable the printer’s ability to print, the out-of-date printer driver, low ink cartridge, and faulty network connection. These are the main possible reasons of not allowing the printer to print.