How do I fix F05 fault Indesit?

How do I fix F05 fault Indesit?

Indesit error F05 or F11 Drain the excess water and collect it. Check if there’s a pin, coin or button in the drain and remove it. Clean and replace the drain filter. If there’s a kink in the hose, carefully straighten it.

What does F 05 mean on Indesit washer?

F05 — Waste pipe blockage or pump issue. Issue: Washing Machines door will not open / the door can be opened but water remains inside the drum. Advice: Please check for blockages in your pump filter (if applicable to model – please see user handbook).

How do I reset my Indesit Moon washing machine?

How To Reset Indesit Washing Machine

1. Switch off the power and unplug the machine.
2. Turn on the machine using the on/off button.
3. Set the timer control to the zero position.
4. Plug the machine back in.
5. Switch on the power.
6. The display lights should now be flashing.
7. Turn off the machine with the on/off button.

How do I fix Indesit F15 error?

F15 – Water is not being pumped out and a flood condition could occur. Check that the drainage hose is raised to the recommended minimum height and that the pipe is not blocked. F16 – Extremely high water level. Disconnect or turn off the water supply and ensure that the water level does not rise any more.

Where is the reset button on an Indesit washing machine?

Try to unplug the washer from the outlet for 2-3 minutes, then right after press and hold the start button for 3 seconds. This should reset the controls and allow you to put the washer into a drain/spin cycle.

Why won’t my Indesit washing machine drain?

It is also important to check the drain hose to ensure this is not blocked, kinked or bent as this can prevent the water draining out of your Indesit washing machine. If your appliance empties into a stand-pipe, ensure the drain hose is not pushed in by more than 4 inches.