What is the labor cost to install a roof?
The average roofing labor cost is between $1.50 and $3.00 per square foot. In roofing, there’s a common term called a “square” that you need to know. One roofing square covers 100 square feet. So you may receive a labor quote of $150 to $300 per square.
What is the labor cost to install a shingle roof?
Labor Cost to Shingle a Roof Typical labor costs are around $1.00 to $1.50 a square foot on average for most roofs using asphalt or architectural shingles, making the labor costs for a 1,500-square-foot roof around $1,500 to $2,250 out of the $6,960 total.
What are the steps to installing a roof?
10 Steps to Building a Roof
- Tear off the old roof.
- Install the drip edge.
- Roll out the underlayment.
- Cover the roof with felt paper.
- Waterproof the valleys.
- Apply starter shingles.
- Install the shingles.
- Install the flashing.
What is the best roof installation?
Relatively lightweight, inexpensive, and easy to install, asphalt shingles are the best choice for most houses. They come in sheets that are layered on a roof to give the illusion of more expensive single shingles, such as cedar and slate, that are installed one shingle at a time.
How much does it cost to replace a roof on a 2500 square foot house?
A new asphalt roof for a typical 2,500 square foot single-story ranch house can range in price from $9,000-$20,000 installed. When looking at higher end materials (e.g. tile, slate, wood, or steel), average figures can jump up to between $9.00 to $15.00 per square foot.
How many bundles of shingles do I need for 1500 square feet?
Thus, to cover roof of a 1500 square foot house, you would need 57 bundles of shingles. Thus, it will take 57 bundles of 3-tab standard size shingles (12″×36″) to cover roof of 1500 square feet house. Thus, there are 57 bundles of standard size 3-tab shingles you will need to cover roof of 1500 square feet house.
What is flashing in roofing?
Roof flashing—Placed around objects or discontinuities which protrude from the roof of a building to deflect water away from joints or seams in valleys where water run-off is concentrated.
What goes under shingles?
underlayment
Directly beneath the shingles is something called “underlayment,” also known as “roofing felt.” As you may have guessed, underlayment is usually either made of fiberglass paper or felt. It covers the entire roof deck.