What is fosroc Conbextra GP?
Conbextra GP is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded filler is designed to assist uniform mixing and produce a consist- ent grout.
How many bags of grout are in a cubic meter?
A bag of 50 lb or 22.70 kg grout is premixed of cement and sand as grout, as we know one cubic metre of ready mix grout weighs around 1600kg, regarding this, How much grout per m3, generally grout per m3 is weight around 1600kg or approx 70 bags of 50 lb grout.
What is the use of fosroc GP2?
Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings.
What is Conbextra HF?
Conbextra HF is a dual shrinkage compensated high flow cementitious precision grout for gap thicknesses up to 125 mm. Conbextra HF has excellent flow retention properties.
What is the density of cement grout?
Technical Data: Type SD
| PROPERTY | TYPICAL RESULTS | STANDARDS & CONDITIONS |
|---|---|---|
| Dry Density (Specific Gravity) | 2.70 grams/cm3 | ASTM C-188 |
| Dry Weight/Wet Volume | 1.01 kg/liter | – |
| WET GROUT [SD] | ||
| Water/Grout | 0.8/1 by weight of dry grout* | – |
Is gp2 code grouting?
Search HS Code
| HSN Code | Product Description |
|---|---|
| 3824 | Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included |
| 382450 | Non-refractory mortars and concretes: |
| 38245090 | Other |
How do you calculate grout coverage?
To work out how much grout you’ll need, follow this easy 6-step calculation:
- Step 1: Tile width (mm) + tile height (mm) = A.
- Step 2: Size of spacers (mm) x tile thickness (mm) = B.
- Step 3: A x B x 1.2 (this number is the coverage ratio of all UltraTile grouts) = C.
- Step 4: Tile width (mm) x tile height (mm) = D.
What is the strength of GP2?
GP 2 is a product of Fosroc and it consist of cement sand and polymers additive. As its a premixed product, if you compare the cost, GP2 will be costliest affair. GP 2 have nonshrink properties, self cured and achieves strength up to M55 grade.
What is the density of GP2?
Approximately 2220kg/m3
Fosroc Conbextra GP2 Epoxy Grout, Packaging Type: Bag
| Packaging Type | Bag |
|---|---|
| Brand | Fosroc |
| Packaging Size | 25 kg |
| Tensile Strength | 3.5 N/mm2 (W/P – 0.18) |
| Freshwet Density | Approximately 2220kg/m3 depending on actual consistency used |
What is non shrink concrete?
A non-shrinking grout concrete is a hydraulic cement grout which when used stays of the same size as the volume of the mixture poured, or higher than the original volume. The grout is something that is used by the construction industry for the purpose to fill up the gaps.
What is fosroc Renderoc plug?
Renderoc Plug are rapid setting mortars which are easy to apply to horizontal, vertical or overhead surfaces at a wide range of thicknesses. There are two grades available: Renderoc Plug 1 with an initial set time of approximately 1 minute, and Renderoc Plug 20 with an initial set time of approximately 20 minutes.