What does E1 mean on a Haier fridge freezer?
2017 and newer models:
| Error Code | Meaning/Reason |
|---|---|
| E1 | Tube temperature / coil pipe sensor failure |
| E2 | Room temperature sensor failure |
| E4 | Anti-freeze protection issue |
| FL | The water chassis is full |
How do I reset my Haier refrigerator?
To reset a Haier refrigerator, unplug the unit and replug it after 60 seconds. If the problem persists after that, hard reset the appliance by unplugging it for about 40 minutes. Then, adjust the fridge’s temperature to the recommended setting by pressing the “Temp” button on the control panel.
Why is my Haier fridge beeping?
If a drawer is ajar for more than 3 minutes, the control panel will beep. If you want to stop the alarm without closing the drawer, press SET.
How do I reset my Haier freezer?
If your chest freezer lights are blinking, reset them by disconnecting power to the freezer for 30 seconds. Once you reconnect power, if they are still blinking, service will be required.
How do I check my Haier error code?
HAIER REFRIGERATOR IS IN LOCKED MODE: Under locked mode, press function select and REF temp at the same time. The refrigerator will sound an alarm and beep. The display panel will show dashes —. If there is an error code, within 3 seconds it will be displayed.
What does E1 mean on refrigerator?
the refrigerator lost power
#354. The 1E error code means the refrigerator lost power. This usually occurs from a power outage. When the 1E is displayed, the display panel will lose all functionality and the refrigerator will not dispense water or ice.
How do you troubleshoot a Haier refrigerator?
Haier – Refrigerator Running but Not Cooling
- Verify the refrigerator is plugged in to a working outlet.
- Make sure the unit is turned on and that the thermostat control is set to a cold temperature setting.
- Frequent door openings.
- Allow time for warm food to reach fresh food temperature.
- Check gaskets for proper seal.
Why is my Haier freezer beeping?
Check the freezer: If your fridge does not have an auto-defrost function then excessive ice-build up in the freezer can cause the beeping alarm. If you see a lot of ice build-up in the icebox or freezer, switch off the fridge and let the ice thaw. Once the fridge is thawed, the beeping should stop.
How do I stop my fridge from beeping?
Fridge Keeps Beeping? Here’s 6 Easy Ways To Quieten It
- Move things around so the door can shut if it’s overloaded.
- Fix a damaged door seal.
- Defrost an icy freezer.
- Balance the fridge properly.
- Replace a faulty door alarm.
- Have a technician fix the circuit board.
How do you reset a refrigerator freezer?
4 steps to reset a refrigerator compressor
- Unplug your refrigerator.
- Turn off the refrigerator and freezer from the control panel.
- Reset your freezer and fridge temperature settings.
- Wait for the refrigerator temperature to stabilize.
What do the codes on a Haier refrigerator mean?
F1, F2, F3, F4, F5, F6, F7, E0, E1, E2, E5, E6, Er, and Ed. Now, these codes represent different faults for different Haier refrigerator models.
Why is my Haier refrigerator not showing up on the display?
If your Haier refrigerator model doesn’t appear here, consult your owner’s manual for help. F1, F2, F3, F4, F5, F6, F7, F8, F9, Fr and Eh indicate that there is an error with some of the sensors. E1, E2, E6, E9 indicate that there is an error with the fan motor.
What does E1 mean on a Haier refrigerator?
If your Haier refrigerator model doesn’t appear here, consult your owner’s manual for help. F1, F2, F3, F4, F5, F6, F7, F8, F9, Fr and Eh indicate that there is an error with some of the sensors. E1, E2, E6, E9 indicate that there is an error with the fan motor. Ec, Ed, Fd, Rd, Hd indicate a defrost error.
How do I Reset my Haier refrigerator?
You can unplug your Haier refrigerator for about 10 minutes to reset it. Sometimes, this reset takes care of the faults that error codes indicate. But if the reset doesn’t take care of it, call a service agent.