Is the HK VP9 threaded barrel?
RCM Heckler & Koch VP9 THREADED BARREL 1/2X28 Each barrel is finely & painstakingly made from ordnance grade steel, heat treated & finished inside & out in the ultra- desirable “nitride” finish. This is the finest threaded barrel available for the HK VP9 9mm pistol.
Does the HK P30L have a threaded barrel?
As for that P30L, yes, it’s a “SD” in that it comes with the factory threaded barrel that is serial number matched to the gun.
Are threaded barrels worth it?
Threaded barrels offer several benefits over traditional barrels. They allow for the installation of suppressors, which can reduce noise and recoil when firing a firearm. They also allow for the installation of muzzle brakes, which can reduce recoil and help you stay on target.
What does VP9 stand for?
The Heckler & Koch VP9 (known as SFP9 in Europe and Canada) is a polymer-framed semi-automatic striker-fired handgun. The VP designation in the name refers to Volkspistole, which translates to “people’s pistol”, while SFP stands for “striker-fired pistol”. The 9 stands for the caliber designation of 9 mm.
What is the difference between VP9 and VP9 tactical?
There are only two differences between the VP9 and VP9 Tactical. The H&K VP9 Tactical features a threaded barrel and according to H&K’s site the tactical models do not use an O-Ring assisted lockup like other H&K models.
How long is the barrel of the P30L?
| Heckler & Koch P30 | |
|---|---|
| Barrel length | 98 mm (3.9 in) P30 113 mm (4.4 in) P30L 83 mm (3.3 in) P30SK |
| Width | 34.8 mm (1.37 in) P30(L) 38.8 mm (1.53 in) P30(L)S 34.8 mm (1.37 in) P30SK |
| Height | 138 mm (5.4 in) P30(L) 116 mm (4.6 in) P30SK |
| Cartridge | 9×19mm Parabellum .40 S&W |
Where is the HK P30L made?
German parts are shipped in and it’s assembled here (US). My USP Tactical, P30, P2000 and P2000SK guns are all German made.
Are HK barrels chrome lined?
HK has quite a bit of chromium in their formula already. Chrome lining was done as a contract requirement. The MR barrels are just as tough, and hyper accurate for what they are. The barrel profile, and their rigidity = superior accuracy without compromise.
Why do Glocks need threaded barrels?
If you have a tactical pistol, a threaded barrel is often the perfect addition, even if you can’t spring for the suppressor just yet. Threaded barrels also allow the addition of breaching mussels, which can add to the usefulness and “cool-factor” of your gun, and a longer barrel will give your muzzle velocity a boost.
Is threaded barrel more accurate?
Threading it shouldn’t affect accuracy, if it was cut down some, maybe. I did read that you may need to re-zero after putting a suppressor on, but doesn’t have to do with the threading.