How efficient is a Vokera boiler?
The most efficient Vokera boilers have efficiency ratings of 94%. Warranty: After the installation of your new boiler, you will be covered by a manufacturer warranty.
What temperature should a Vokera boiler be?
The temperature can be set from a minimum of 37°C to a maximum of 60°C.
What pressure should my Vokera boiler be at?
between 1 and 1.5 bar
The pressure gauge shows the current pressure of the system, the gauge should be set between 1 and 1.5 bar. When the appliance is operating the gauge may rise or fall slightly, this is quite normal. The minimum permissible level for the safe and efficient operation of the appliance is 0.5 bar.
What does A03 mean on Vokera boiler?
Faulty fan
Faulty fan (error code A03) Seeing the Vokera A03 error code, likely to be accompanied by the image of a bell, means that your boiler’s fan is faulty. If you’ve had your boiler for some period of time then this suggests that it has worn down over time and needs replacing.
Who make Vokera boilers?
the Riello Group
Owned by the Riello Group, Vokera has established itself as a popular domestic heating brand across both the UK and Ireland. Founded over 30 years ago, the brand prides itself on designing energy-efficient heating solutions to suit customers’ central heating needs.
What does ao1 mean on a boiler?
ignition failure
1. Vokèra Linea fault code 10 (Vokèra Compact code A01) This fault code suggests that there is an ignition failure with the boiler. You might also hear the boiler sparking up but failing to ignite. Potential fix: To fix this issue, your qualified engineer will aim to test the voltage going to the gas valve.
What should boiler pressure be?
between about 1-2 bars
Normal boiler pressure should be between about 1-2 bars. The ideal boiler pressure is often marked as a range in green on the gauge itself. With red indicating the low and high boiler pressure zones.
What does Sun mean on boiler?
the auxiliary heating source (boiler) can be selected. Clock will give control at the times you have set. Sun will put system “ON” constant with no response. to times programmed into control.
How long should an ideal boiler last?
around 15 years
Average lifespan of a boiler Most boiler manufacturers and fitters put a similar timescale between new installations, and it’s usually around 15 years.
What does A07 mean on boiler?
Vokera Boiler Fault Codes / Error Codes List
| Fault Code | System Behaviour |
|---|---|
| A04 | Insufficient system water pressure |
| A06 | Domestic how water (DHW) thermistor fault |
| A07 | Primary flow thermistor fault – temperature of the water is too high |
| A08 | Return thermistor fault – water temperature too high |