How do you fix the alarm on a Delonghi coffee machine?

How do you fix the alarm on a Delonghi coffee machine?

Clean the drip tray and grounds container thoroughly. Place the grounds container on the drip tray and slide the tray back into the machine. Switch the machine on and press the power button. The general alarm light should no longer be showing.

What is general alarm on Delonghi coffee machine?

The machine will boot up ok. So the General or Generic alarm can mean a failure to detect a hot element by the NTC sensor, this is often caused by a failed thermal fuse or element or a failed Triac on the main board.

Why is the red light flashing on my Delonghi Magnifica?

Light on steadily: the water tank is missing; Light flashing: there is not enough water in the tank. Light flashing: the appliance must be descaled (see the section “Descaling”). Light on steadily: the appliance is performing a descaling cycle.

Why are the lights flashing on my DeLonghi coffee machine?

When the appliance is turned on Flashing lights: the appliance is heating up to make coffee Lights on steadily: the appliance is ready to make coffee The lights flash rapidly: the tank is empty or the appliance will not make coffee.

Why is my DeLonghi coffee maker blinking?

If both coffee buttons are blinking it means that the temperature is too high to brew the espresso correctly. To cool the machine down turn the steam dial on the ON position to allow water to be released from the machine. When the water stops, turn the dial to the ‘O’ position. The machine is now ready to brew again.

What does orange light on Delonghi coffee machine mean?

descaling
If the steam light is flashing white, it means means the machine is getting ready to steam (the boiler is heating the water.) If it is orange, the machine needs descaling. If it is flashing orange, it means the descaling process was begun and has terminated.

How do you reset the descaling light on a Delonghi Magnifica?

The descaling light on my De’Longhi Magnifica stays on

1. Fill the water tank up to level B. Step 1: Switch on the coffee machine by pressing the on button.
2. Switch on the descaling.
3. Activate rinsing.
4. Fill the water tank up to ‘MAX’
5. Repeat steps 9 through 11 once more and you’re done.

Why is my Delonghi coffee machine not working?

If you notice the De’Longhi Coffee Maker not pumping water, make sure the tank is placed correctly. If the water tank is not positioned correctly, an air bubble can form in the system and block the water supply. If the tank is not correctly set, you need to remove the water reservoir and empty it.