How do I fix windows unable to boot?

How do I fix windows unable to boot?

Our advice is to start with the easiest fixes and, in order, move to the harder ones.

1. Try Windows Safe Mode.
2. Check Your Battery.
3. Unplug All Your USB Devices.
4. Turn Off Fast Boot.
5. Check Your Other BIOS/UEFI Settings.
6. Try a Malware Scan.
7. Boot to Command Prompt Interface.
8. Use System Restore or Startup Repair.

How do I force start Windows on my HP laptop?

Turn off the computer, and then unplug the power cord. Disconnect any peripheral devices, and then remove the computer from any port replicator or docking station. With the power cord unplugged, press and hold the Power button for approximately 15 seconds. After you drain the capacitors, plug in the power cord.

How do I restore my HP laptop to factory settings when it wont boot?

Turn on the laptop and immediately press the F11 key repeatedly until System Recovery starts. On the Choose an option screen, click “Troubleshoot.” Click “Reset this PC.” Click either “Keep my files” or “Remove everything” depending on which you prefer.

How do I get my HP logo Back on startup?

Select Boot-time Diagnostic Screen using the up and down arrow keys. Press Enter to select boot-time diagnostic. Select Disabled to show the logo screen or select Enabled to remove the logo screen and display diagnostics. Press Enter.

What do you do when your HP laptop screen goes black?

Fix 1: Hard reset your laptop

1. Turn off your laptop.
2. Remove the power, hard drives, the battery and any attached peripheral devices.
3. Press and hold the power button for 60 seconds and release.
4. Put your battery in and plug the charger. Then don’t plug anything else.
5. Boot your laptop again to see if it works now.

What causes a computer not to boot up?

The causes of computer failure to boot up can be broken down into four categories as follows: Bad electrical connection. Power supply failure. Operating system failure.