Why does Synology NAS have two Ethernet ports?
two (or more) Ethernet Ports can be used, aggregated together, to provide enhanced resiliency against port/cable failures (on both ends of the considered links) and, in some scenarios, enhanced overall throughput (this depends strictly on how traffic traversing the links is originated)…if you have a IEEE 802.3ad ( …
Can you connect two Synology NAS together?
With Synology Drive ShareSync, you can seamlessly sync data among multiple Synology NAS devices.
Why does NAS have 2 ports?
It is designed to increase bandwidth when multiple clients are simultaneously accessing the same system. If you connected both ports to your network, you could lose one of the physical connections or even an entire switch, and still have access to your NAS.
Does the ds415+ consume a lot of power?
The DS415+ isn’t very large as its size is basically defined by the four 3.5″ HDDs it can accommodate. Synology also says the unit to consume very little power. We will conduct our own tests to verify the provided data. The NAS’ power brick is strong, so it will easily handle the unit’s needs.
What is the difference between the ds410j and ds411+?
The DS410j comes with an 800MHz processor and 128MB of RAM whereas the DS411+ has a new dual-core 1.67GHz CPU and a heaping 1GB of DDR2 memory. In our last review we found that most transfer speeds were limited by the processor, which hopefully won’t be a problem this time around.
What is the Synology ds415+?
What is the Synology DS415+? This is the small business focused four-bay follow up to the DS414 (a ‘DS415’ is due soon). The critical difference here is the DS415+ is optimised for encryption while it still delivers the same multimedia expertise as its consumer-focused stable mate.
What’s the difference between the ds415+ and DS Rangeley?
Rangeley supports up to 64GB of system memory, but Synology loads the DS415+ up with just 2GB of DDR3 via a single SO-DIMM slot. Moreover, the company doesn’t build in an easy-access trap door for upgrading the RAM.