What year is a John Deere STX38?
Two basic versions of the STX38 were the original “yellow-deck” from 1989 to 1993, and the later “black-deck” from 1994 to 1997. The STX38 yellow-deck model was available with more features than the later black-deck version.
How much oil does a John Deere STX38 take?
2 qts 1.9 L
John Deere STX38 Yellow Deck Engine
|Oil capacity||2 qts 1.9 L|
|Oil change||50 h|
How do you engage the blade on a John Deere 100 series?
How to Engage Lawn Mower Blades on a John Deere
- Turn the key to the “on” position, advance the throttle to half speed and allow the engine to warm up for 2 minutes.
- Lower the mower to the desired cutting height.
- Engage the mower blades; push the lever to the right of the steering wheel all the way forward.
What kind of oil does a John Deere STX38 take?
Both STX38 models need 2 quarts of high-quality detergent oil with an API service class rating of SG, SH, SJ or higher and an SAE grade of 10W-30 when temperatures are above 32 degrees Fahrenheit, or a 5W-20- or 5W-30-grade oil when temperatures fall below 32 F.
Who makes yellow tractor?
1John Deere (Green and Yellow) There isn’t a brand out there that can pride itself with such a traceable history as John Deere does. Even though the company started in 1837, its path through history can be easily accounted at every point.
Which way do John Deere blades go on?
Most lawn mower blades rotate in a clockwise direction (counter-clockwise when viewed from below), and as such have the cutting edge on the right side. If you are unsure of how your mower rotates, check the position of the discharge chute; if it is on the right side angled back, the blade turns clockwise.
What kind of oil goes in a John Deere lawn tractor?
John Deere prefers that 10W-30 be used in all its gasoline-powered engines, including those on riding mowers. The “W” indicates that the oil was tested at low air temperatures. A 10W-30 weight engine oil is viscous even at temperatures as low as negative 4 degrees Fahrenheit.