What year Hilux had injector Problems?
This problem affected the early editions of the 3-litre diesel engine built before August 2007 and there have been a number of updated injectors released – both from Toyota as well as aftermarket companies. The injector seals were also changed from copper to aluminium as the copper seals were prone to failure.
What is Multihole injector?
High-pressure multi-hole injectors are one candidate injector type for closed-spaced direct injection (DI) gasoline engines. In such a system, the spark plug must be located close to the spray and, during stratified operation, the spray is ignited very soon after the fuel droplets have been vaporized.
What is a reconditioned injector?
Refurbished means that the fuel injectors have been taken off from running engines to be cleaned throughout and tested to make sure that they can meet current OEM specifications. Remanufactured fuel injectors are those that have been fully disassembled, checked for wear, and rebuilt with new components.
What is single hole injector?
The Single Hole Nozzle: In this type of nozzle at the center of the body there is a single hole which is closed by the nozzle valve. The size of the hole is usually of the order of 0.2 mm. Injection pressure is of order of 8-10MPa and spray cone angle is about 15 degree.
What are the advantages of multi hole nozzle?
When using multi-hole over single-hole injectors in a diesel engine it it possible to employ smaller holes and this results in superior atomisation of the fuel and more thorough fuel/air mixing thereby generating greater efficiency. At least in direct injection CI engines, you get the injected droplets burning.
What are the two types of injectors?
There are basically two types of non-hydraulic common rail injectors — electromechanical solenoid base and Piezo. Piezos are typically found on newer applications, depending on the vehicle.
Are reconditioned injectors any good?
Since remanufactured fuel injectors have been rigorously tested and have had their internal parts replaced as needed, you get the reliability of a new injector. Plus, you get it at a lower price point. Remanufactured products are gaining ground because of these advantages.
How much does it cost to rebuild injectors?
On average, you can expect to pay between $350 and $850 to replace your fuel injectors. The range of costs depends on a number of factors.
What kind of engine does a Toyota Hilux kun26 have?
Explore the latest vehicle specifications for the Toyota Hilux Pickup KUN26 2005-2011 model with the 3.0 D4D diesel 1KD-FTV engine code. In this article you will discover the most up to date information of which lubricant type, grades, capacities and service schedules for all areas as well as torque settings, vehicle weights, BHP and much more.
What if I don’t know which injector I Need?
If you are unsure about which injector you need, contact our friendly sales team on 1300 732 462. Please have your VIN or registration number ready and we will be able find the right part for your vehicle. DISPLACEMENT: 3.0L
How do I remove the injector from the work area?
Using a heavy O-ring pick or small flat-blade screwdriver, pry injector boots off and remove from the work area Sunday, September 18, 11
How to install injector boots and injector lines?
•Install injector boots into their holes, then hand-tighten all injector lines to their injectors. •Tighten all injector lines •install injector line clamps