What rear end is in a 76 Nova?
Moser Engineering 12 Bolt Rear End | 1962-1976 Chevrolet Nova.
How wide is a 71 Nova rear end?
MEASURED ACROSS WHEEL MOUNTING SURFACE
| Year | Classic Vehicles | Width Rear |
|---|---|---|
| 68-72 | Nova | 60″ |
| 78 & up | Monte Carlo, Regal, etc. with 10 bolt axle | 58″ |
| 68-72 | Chevelle with 10 bolt axle | |
| 89 | Trans AM (Disc brake) |
How can you tell the difference between a 7.5 and 8.5 rear end?
The 8.5 rearend will have a round cover, and part of the cover will extend rearward to make room for the ring gear. You will also notice the large, flat, cast-in protrusions at the five and seven o’clock positions. These protrusions are larger than those on the 7.5 rearend.
What is a 10-bolt differential?
The 10-bolt differential cover is located on the rear of the axle and is an 11-inch x 10.25-inch oval. An important thing to note is that the ring gear bolts are . 4375-inch left-hand thread on all 8.5-inch differentials.
How do I identify a Chevy 8.5 rear end?
Another way to tell the difference between an 8.2 and an 8.5 rearend is to pull the cover and look at the bolt holding the spider gear crosspin. If it takes a 1/2-inch wrench to remove it, it’s an 8.2. If it takes a 5/16-inch wrench to remove it, it’s an 8.5.
How wide is a 1972 Nova rear end?
Products specifications
| Vehicle Fitment | 62-72 GM X-body vehicles (Nova, Chevy II, Super Sport, Apollo, Omega, Ventura) with single or multi-leaf rear springs |
|---|---|
| Brake Space | 2.5 inch axle standoff |
| Width | 62-67 = 57.875 inches / 68-72 = 60.250 inches (between wheel mounting surfaces) |
How wide is a Ford 8.8 rear end?
A Ford 9-inch has a ring-gear diameter of, you guessed it, 9 inches closely followed by the 12-bolt at 8.875, with the Mustang rear at 8.80 inches. Another strength consideration is pinion-shaft diameter. Here, the 8.8 and the 12-bolt are identical at 1.625 inches and in fact use the same pinion bearings.