What MERV rating should I use for Covid 19?
What kind of filter should I use in my home HVAC system to help protect my family from COVID-19? Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses.
What is a good MERV rating for filters?
about 5 to 8
Using an air filter with a MERV rating of about 5 to 8 is appropriate for most residential homes. MERV 5 – MERV 8 filters provide good filtration and will remove most pollen, mold spores, and dust mites.
Is MERV 11 too high for home?
In most cases, a MERV 11 air filter isn’t too high for residential use. Generally speaking, anything under a MERV 13 air filter should provide very efficient air purification in a home without impacting airflow.
Can I use MERV 13 filter for face mask?
Higher than MERV-13 rated filters are not recommended as they offer little to no added protection while making it much more difficult to breathe. MERV-12 rated filters and below are 80% less effective at blocking sub-micron particles. Thus, MERV-13 is considered the optimal face mask filter.
Are MERV 13 filters bad for HVAC?
According to the ASHRAE, the best rating for residential HVAC systems is MERV 13. But before you upgrade your filter, make sure your specific system can accommodate that rating. A higher MERV rating often means lower airflow, which can cause the system to work harder—use more energy—to do its job.
What MERV level is HEPA?
MERV 17
A HEPA is the creme de la creme of air filters with an equivalent rating of a MERV 17 or higher. A HEPA filter at a MERV 17 rating will trap 99.97% of air particles that are 0.3-1.0 microns in size.
Can I use MERV 13 in my HVAC?
MERV 13 air filters are the highest-rated air filters for home use. Any air filter with a rating higher than 13 will restrict air flow to the point of which could cause damage to your HVAC system, resulting in an added expense to fix it.
Can my furnace handle MERV 13?
The ideal MERV filters for both air filtering and furnace efficiency are 7-13, experts say. These filters can be used without any modifications to your equipment. Your system may handle MERV 14-16 with no discernable stress. However, many residential systems require modifications to pull air through these filters.
Can I use MERV 13 in my furnace?
MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units. If you are wondering what MERV to try, keep these recommendations in mind; ASHRAE recommends MERV 6 or higher.