How much HP can a B18C1 handle?
How Much Boost Can Stock B18c? The B18 internals can handle 300 horsepower when tuned properly. The weight can be as high as 12 pounds, but make sure the tuning is correct. With that turbo, you should be able to reach 275 with 10 or so psi.
What is the difference between B18B and B18C?
b18b is non-vtec and only appeared in the GSI integra. Both make roughly the same torque but vti-r revs higher and makes more horse power. b18c is vtec and was in the vti-r and a variant was in the integra type r. b18b is non-vtec and only appeared in the GSI integra.
What motor is a GSR?
B18C1 DOHC VTEC engine
The GSR (GS-R), which means ‘Grand Sport Racing, is very different from all of the ones mentioned above. This type has all the features and more. Most significantly, it has a B18C1 DOHC VTEC engine, which generates 170 hp at 8000 rpm. It is a truly more powerful beast compared to the other Integras.
Are all B Series rods the same?
b) Rule 2: Any B series rod will fit any B series crank, EXCEPT the B18C’s and B16B (CTR) { i.e. “R” family: ITR, GSR, CTR}. The B18C1, B18C5, and B16B rod are 1.96-2 mm narrower (0.858 in.
Does B16A have VTEC?
B16A (First Generation) Featuring a compression ratio of 10.2:1 and VTEC engagement from 5,500rpm, a redline of 8,000rpm, and an 8,200rpm rev-limiter, this first-generation powerplant was a revolutionary gamechanger at the time.
What is the difference between B18C1 and b18c2 and b18c3?
B18C2 was an analogue of B18C1 for Australia and New Zealand. The engine was designed for Honda Integra VTi-R. 10. B18C3 was a B18C1 analogue for the Asian market. 11. B18C4 was a B18C1 analogue for Europe. The engine was installed in Honda Civic. 12. B18C5 was an analog of the JDM B18C Type R for USDM Acura Integra Type R.
What are the specs of a B18C5 engine?
Honda B18C (B18B) engine modifications and differences. Specifications of B18C5 camshafts are the following: duration (at .050″ or 1 mm lift) 240/235 deg, lift 11.5/10.5 mm. As a result, the power reached 195 HP @ 8,000 rpm, and the torque was 176 Nm @ 7,500 rpm, and the redline was set to 8,300 rpm.
What kind of compression does a B18C Type-R have?
B18C Type-R was an improved analogue of B18C and B18C5. The compression ratio was increased to 11.1, and a new intake manifold was installed. For the B18C 98 Spec R engine, the 4-1 header was used.
What is the power of the Honda B18B3 engine?
The power was 142 HP @ 6,300 rpm and the torque was 172 Nm @ 5,200 rpm, with the rev limit of 7,200 rpm. This engine was intended for Acura Integra, Honda Integra, JDM Honda Domani and Orthia. 3. B18B2 was the B18B1 for Australia 4. B18B3 was the version for Honda Civic for South Africa and the Middle East.