How much does a quart of Waterlox cover?

How much does a quart of Waterlox cover?

600-800 sq.ft
1 Quart (32 oz.)= 600-800 sq. ft.

Is Waterlox better than Tung Oil?

While Waterlox Original Tung oil finishes contain a superior drying oil, namely Tung Oil, they are fully cooked varnishes, which dry quicker and form permanent films tough enough to walk on and take daily abuse. Waterlox Original Tung oil finishes are also water and chemical resistant (alcohol and alkali).

Does Waterlox have VOCs?

Waterlox ORIGINAL VOC Compliant Sealer/Finish and Satin Finish are low VOC formulations of our ORIGINAL products. They should be used in locales where architectural coating VOC has been restricted.

Can you wipe on Waterlox?

Clean up. Wipe the surface clean with a clean lint free cloth, very lightly dampened with mineral spirits. This will pick up all the material from the pores and slurry from buffing and should restore the clarity. At this point you should have a very smooth, consistent surface.

How long does Waterlox take to cure?

30 – 90 days
Dry time will depend upon ventilation, humidity and temperature. CURING Even though the recommended dry time is 24 hours, Waterlox Original Tung oil finishes completely cure in 30 – 90 days.

Does Waterlox yellow?

Unlike linseed oil-based polyurethanes, our URETHANE formula will not yellow over time. Excellent water resistance. Non-toxic when dry and fully cured.

How many coats does Watco have?

2 coats
For Watco Danish Oil, 2 coats will usually be good enough. It’s used for finishing the wood’s appearance, and the difference in look will be minimal as between the second coat and a third coat.

How long does Watco Danish Oil take to cure?

Wipe surface completely dry. Ready for use in 8-10 hours 5. If a topcoat is required, use Varathane® Interior Diamond Wood Finish (oil based or water based) or Varathane® Professional Clear Finish. Allow WATCO® Danish Oil to dry 72 hours before applying.