How do I reset my PDU password?

How do I reset my PDU password?

APC PDU AP7900 – resetting the password

1. Press the reset button for 10 seconds.
2. The light might start pulsing or go out.
3. Release the reset button and press it again for 1 second.
4. The light should pulse / go orange.
5. After a short while (10-20s), the reset will be complete.
6. Now you can login as apc/apc.

How do I reset APC Rack PDU?

Resetting APC AP7920 PDU

1. Press and hold the reset button for about 10 seconds.
2. The status light should blink rapidly.
3. Release the reset button then press it again for about a second.
4. The light should go orange.
5. After about 20 seconds the reset will complete and the device will have booted.

How do I find my PDU IP address?

For PDUs with a display screen: Press and hold the select button for a few seconds. Once “IP” appears on the display screen, release the button. Your unit will then display the IP address in a sequence of four groups.

How do I access PDU?

Access a Metering Unit on the Network (Original PDU)

1. Ask your network administrator for the IP address of the PDU metering unit.
2. On a system connected to the network, type the metering unit IP address in a web browser’s address line to connect to the PDU metering unit.
3. When prompted, log in as an admin or a user.

How do you set up a PDU?

Procedure

1. Connect a DB9-to-RJ45 PDU communications cable from the RS232 port on the PDU to the serial (COM) connector on a monitor.
2. A console window opens.
3. Type the default user ID.
4. When the console prompts you for a password, press Enter.
5. When you are prompted to log in again, type the default user ID Admin .

How do you connect PDU?

Connect an Original PDU to a Static IP Address Network

1. Connect a crossover patch cable from the system to the PDU metering unit’s RJ-45 Ethernet port.
2. Connect the PDU power input lead to the AC power source.
3. On the system, use a web browser to log in to the PDU metering unit.