How do I reset my HP c7000 enclosure?
Warm reset (reboot) of the enclosure: The Onboard Administrator (OA) has a reset button on the rear of the enclosure. It can also be reset through the OA Insight Display’s Enclosure Information screen. The servers can be reset through the OA or through the Integrated Lights-Out 2 (iLO 2).
How do I setup my HP c7000 enclosure?
HP c7000 Enclosure configuration – Insight Display
- Navigate to Enclosure Settings.
- Navigate to Active OA and click OK.
- Navigate to Active IPv4 and click OK.
- Choose proper value – static IP configuration or DHCP and click OK.
- Interface will direct you to Accept button.
- Now you can enter your IP address.
How many blades occupy in c7000 chassis?
A BladeSystem c7000 enclosure holds up to 16 servers and/or up to 8 expansion blades (not exceeding 16 total blades) plus redundant network and storage interconnects.
What is HP c7000 enclosure?
The HPE BladeSystem C7000 is a 10u high-density enclosure that supports up to 16 half-height blade servers. The enclosure provides shared power, cooling, and networking. It also offers easy management of shared resources and the ability to quickly scale as your business needs change.
How do I reset my onboard administrator C7000?
Press and hold in the HP BladeSystem Onboard Administrator reset button for 5 seconds. Select LP from the serial console prompt. Press L to boot the system into Lost Password mode. The password appears on the screen as it reboots.
How do I reset my HP Virtual to factory settings?
You can fully reset the Virtual Connect modules by moving the modules in interconnect bays 1 and 2 to other slots in the same chassis. After the modules have been reset, move them back to slots 1 and 2. You can also do the ‘Clear VC Mode’ in the OA ‘Reset Factory Defaults’ screen.
How do I set up OA?
Log in to the Onboard Administrator with the Administrator user account and the OA dogtag password. Set Onboard Administrator name: SET OA NAME 1 . If a redundant Onboard Administrator is present, set the name to: SET OA NAME 2 . Configure Onboard Administrator IP address.
What is blade enclosure?
The blade enclosure, also known as chassis, caters to the power, cooling, network connectivity and management needs of each blade. Each blade server in an enclosure may be dedicated to a single application. A blade server can be used for tasks such as: File sharing. Database and application hosting.
What is HPE enclosure?
A BladeSystem c7000 enclosure holds up to 16 server and/or storage blades plus redundant network and storage switches. It includes a shared, multi-terabit High-Speed Mid-Plane for Wire-Once connectivity of server blades to network and shared storage.
How do you turn on a C7000?
Power down the enclosure
- Use a virtual power button selection through iLO.
- Press and release the Power On/Standby button.
- Press and hold the Power On/Standby button for more than 4 seconds to force the server blades or workstation blades to enter standby mode.