How do I fix the document feeder on my HP 8600?

HP Officejet Pro 8600 Printers – The Automatic Document Feeder (ADF) Does Not Pick Paper

Step 1: Check the condition of the paper and reload it. The quality and type of paper can affect the print job.
Step 2: Clean the ADF pick rollers.
Step 3: Reset the printer.
Step 4: Service the printer.

How do I load paper into my HP Officejet Pro 8600?

To load cards and photo paper Use these instructions to load photo paper.

Pull out Tray 1.
Insert the media print-side down in the center of the tray.
Slide the media guides in the tray to adjust them for the media size that you have loaded, and then reinsert the tray.
Pull out the extension on the output tray.

How do I fix my printer not grabbing paper?

The printer does not pick up or feed the paper from the tray….

Turn off the printer.
Disconnect the power cord from the back of the printer.
Raise the input tray.
Pull the input tray guard back and hold it so you can look inside the input tray.
Look down through the open input tray and find the gray paper pick rollers.

How do I use document feeder?

Using the Document Feeder

Remove any staples, paper clips, etc.
Move the side guides outward as far as they will go.
Place the document set to be scanned or copied face up in the center of the document feeder input tray.
Move the side guides inward.
Make any programming choices in the user interface.
Click .

What is document feeder in printer?

In multifunction or all-in-one printers, fax machines, photocopiers and scanners, an automatic document feeder or ADF is a feature which takes several pages and feeds the paper one page at a time into a scanner or copier, allowing the user to scan, and thereby copy, print, or fax, multiple-page documents without having …

How do I get my HP 8600 to print on photo paper?

This worked for me:

right click on printer icon, open.
select printer yu are using (8600), click ok.
click on select Set Preferences.
layout=portrait.
paper/quality= printer auto select (or the tray you are using) paper= size 4×6. media=scroll down to photo paper you are using.
click ok.

How do I change the paper type on my HP Officejet Pro 8600?

click on start menu open your printer preferences by right clicking icon and selecting printer preferences -under paper/quality tab be sure to change your paper type to “cardstock” under media- also if you are printing with microsoft office/word/ serif or which ever program you are using make sure the media or paper …

Why is my printer not sucking up the paper?

Dust, paper fiber, and other debris might accumulate on the pick rollers and cause paper feed issues. To help prevent paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped). If the other steps in this document fail to resolve the issue, then reset the printer.

Is there a way to feed media to the 8600?

Page 166 of the user manual here indicates card stock (up to 110lb) is supported in the top tray but only plain paper is supported in the bottom tray. I looked over my 8600 carefully, it does not appear there is any way to manually feed media. I am not an employee of HP, I am a volunteer posting here on my own time.

Does the ADF on the Officejet Pro 8600 pick up paper?

Loading… This document is for the Officejet Pro 8600 e-All-in-One printers. The Automatic Document Feeder (ADF) on the printer does not pick up paper. The procedures in this document can help by showing you how to check the paper and clean the ADF mechanism.

Does the 8600 support cardstock or plain paper?

Does the automatic document feeder (ADF) pick up paper?

Loading… Loading… Loading… Loading… This document is for the Officejet Pro 8600 e-All-in-One printers. The Automatic Document Feeder (ADF) on the printer does not pick up paper.