TheGrandParadise.com Advice How do I connect to Cisco UCS?

How do I connect to Cisco UCS?

13/08/202213/08/2022| Shirley GriffinShirley Griffin| 0 Comment | 12:00 AM
Categories:

How do I connect to Cisco UCS?

Setup the Cisco UCS environment and configure the UCS?

  1. Setup the Fabric Interconnect (UCS Manager) .
  2. Laid the cabling between the chassis and Fabric interconnect.
  3. Connect the FI’s to the Nexus switch.
  4. Configuring the Fabric Interconnects.
  5. Launch the UCS manager using the cluster IP.

How do I start Cisco UCS?

The following procedure is used for the initial setup of the first Cisco UCS 6100 Fabric Interconnect.

  1. Connect to the console port.
  2. Power on the Fabric Interconnect.
  3. When the unconfigured system boots, it prompts you for the setup method to be used.
  4. Enter setup to continue as an initial system setup.

How does Cisco UCS work?

With Cisco UCS, servers are connected to the Fabric Interconnect, then the Fabric Interconnect is connected to the network switches. The Cisco Fabric Interconnect is ALWAYS deployed in pairs, and each server or blade chassis is connected to both Fabric Interconnects to protect against Fabric Interconnect failure.

How do I link my UCS to fabric interconnect?

Copy the web link from the prompt into a supported web browser and go to the Cisco UCS Manager GUI launch page. On the Cisco UCS Manager GUI launch page, select Express Setup. On the Express Setup page, select Initial Setup and click Submit. In the Cluster and Fabric Setup Area, select the Standalone Mode option.

How do I set up fabric interconnect?

  1. Connect to the console port.
  2. Power on the fabric interconnect.
  3. At the installation method prompt, enter gui .
  4. If the system cannot access a DHCP server, you are prompted to enter the following information:
  5. Copy the web link from the prompt into a supported web browser and go to the Cisco UCS Manager GUI launch page.

What does UCS stand for Cisco?

Unified Computing System
Cisco Servers – Unified Computing System (UCS) – Cisco.

Is Cisco UCS a server?

Cisco Unified Computing System (UCS) is a data center server computer product line composed of server hardware, virtualization support, switching fabric, and management software, introduced in 2009 by Cisco Systems.

https://www.youtube.com/watch?v=M1Yq3fWZ-3I