What is the difference between a Telecaster and a Thinline Telecaster?
Thinline Telecaster Sound When it comes to sound, the Thinline is noticeably warmer and rounder compared to the usually bright and twangy solid body version. The Thinline still recreates the classic chime and twang only now a slightly more hollow and rounder variation of the classic Tele sound.
Where was the Fender Deluxe Thinline Telecaster made?
Thinline versions have been made in Mexico and Japan as a part of the Classic Series of guitars and basses, followed by higher-end American-made Factory Special Run (FSR) versions from the Fender Custom Shop in 2005 and 2013….Fender Telecaster Thinline.
| Fender Telecaster Thinline – 1972 | |
|---|---|
| Body type | Semi-hollow |
| Neck joint | Bolt-on |
| Scale | 25.5″ |
| Woods |
How thin is a Thinline Telecaster?
The typical thickness for a Fender Thinline is about 1.75 inches [1.5 inches for the main body plus a . 25 inch cap] the same thickness as a standard Telecaster. Squier bodies are known to be a little bit thinner than their standard American counterparts – some have been known to be as thin as 1.5 inches.
Are Telecaster Thinlines good?
The first thing I noticed about the Elite Telecaster Thinline is just how incredibly loud and vibrant the guitar sounds unplugged. It also just feels great. Fender’s precision neck carves always possess an effortless contour, and this particular neck feels tailor-made to fit comfortably snug in the pocket of my hand.
What kind of pickups are in a Telecaster Deluxe?
The Deluxe features 2 Seth Lover-designed Wide Range humbuckers with “CuNiFe” (Copper/Nickel/Ferrite) rod magnets in the place of pole-pieces. This design yielded a brighter and clearer sound more similar to that of single coil pickups.
Do telecasters sound thin?
Telecasters are well known for their bright and twangy kind of tone. This is primarily due to the alder body, maple neck and single coil pickups. The main issue with Tele’s, is that the tone sometimes can sound a bit on the thin side.
How many Fender Telecasters have been made?
If that number is misleading (not sure what other brands would have been included in the 1.1 million number), we can use the new Corona factory production number as a guide: 350 guitars a day, then Fender is doing about 700 guitars a day in North America. That is about 200,000-250,000 per year, in 1998.
Is an American made Fender Strat worth the extra?
The American Stratocaster is a beautifully made guitar crafted using alder or ash to make premium tonewoods by some of the best master craftsmen in the world. One of the reasons that the American is priced higher is the additional quality craftsmanship and cost of labor needed to be manufactured in America.
What happened to the Fender offset Telecaster?
Offset Fender, The 90s and Beyond Adopted and adapted, mash-ups of the offset body guitars weren’t looked at with a sideways glance any longer. What started out as humbucker modifications, simplified electronics, and tweaks to fix the shallow break angle (helping the low E string to stay in its saddle) became actual official models.
What is the length of Fender Telecaster?
The Telecaster’s scale length is 25.5 inches (648 mm). There have been minor changes to the design over the years and models with features that differ from the archetypical design. However, the essential character of the design has remained constant. The Fender Telecaster was developed by Leo Fender in Fullerton, California, in 1950.