How many bands are on 48RE?
There is 2 bands to adjust, is that right?:thumbsup: 2005 Ram 2500 QCSB Gray,Self Built Xduty 48re W/ Revmax LSBilletSD and HTS Valvebody. 4in flowtech, AFE Bladerunner, Custom airBoX,90hp tips, 3″ lift, 20″ XD Addicts,35″ Trail Graps, ’08 Sport front end, Ranchhand rear bumper.
Will loose transmission bands symptoms?
Signs include:
- Engine revs or chugs.
- Slow, weak or delayed acceleration.
- Difficulty shifting gears or hard shifting.
- Grinding, whining or other strange noises.
- Won’t go in reverse.
- Burned or strange smells.
- Check engine light.
How does a 48RE work?
The 48RE transmission reads the engine load and current vehicle speed to determine whether it should trigger an upshift or a downshift. It has four shift schedules, or governor pressure curves, which are all controlled by electrical solenoids.
How do you adjust a C4 transmission band?
*No external band adjustments on TH350, TH400, 2004R, 700R4….Automatic Transmission Band Adjustments.
| Transmission | Intermediate Band | Low-Reverse Band |
|---|---|---|
| C4 | Tighten to 120 in/lbs, Back Off 1 3/4 Turns Counterclockwise | Tighten to 120 in/lbs, Back Off 3 Turns Counterclockwise |
What temp should a 48RE run at?
Registered. The 48RE is designed to run at a transmission fluid temperature at or near 200° F, although temperature spikes well beyond this are common while towing, especially in overdrive where transmission load is high.
Is the 48RE a 4 speed?
The 48re is a 4 speed. The only thing you can do would be to put an over/under on it.
How do you tighten the band adjusting screw on a Honda Accord?
1. Raise vehicle. 2. Loosen band adjusting screw locknut. Then back locknut (1) off 3-5 turns. Be sure adjusting screw turns freely in case. Apply lubricant to screw threads if necessary. 3. Tighten band adjusting screw to 8 N·m (72 in. lbs.) torque with an appropriate Torx™ socket.
What kind of transmission does a Chrysler 48RE have?
Based on the A618, the 48re is an electronically governed, ECU controlled four-speed automatic overdrive transmission that is a stronger version of its predecessor, the 47re. The 48re has a torque rating of about 550-570 ft lbs, and Chrysler gives it a strength rating of 8.
What is tow mode on a 48RE?
Rather than being controlled by a TV cable, the 48re utilizes a solenoid-controlled valve body. The transmission utilizes a Tow / Haul mode that can be found on the shifter. This changes the shift points and allows the torque converter to lock up earlier due to the elimination of 4th (Overdrive) gear.
What is the torque rating of a 48RE Transmission?
The 48re has a torque rating of about 550-570 ft lbs, and Chrysler gives it a strength rating of 8. Rather than being controlled by a TV cable, the 48re utilizes a solenoid-controlled valve body. The transmission utilizes a Tow / Haul mode that can be found on the shifter.