How do I reset my opengear 7100?

How do I reset my opengear 7100?

Factory reset using the ERASE button

1. Ensure the Opengear device is powered on and has fully booted, e.g. power on and wait 5 minutes.
2. Use a paperclip or ballpoint pen, do not use a graphite pencil.
3. Gently depress the ERASE button twice within a 2 second period.

How do I reset my Nikon D7200?

The Easy Way To Reset Nikon D7200 DSLR Camera To Factory Settings

1. Turn on your camera. Make sure your camera has enough power.
2. Press and hold the ISO and +/- EXPOSURE COMPENSATION buttons simultaneously for three seconds. Both buttons denoted by the green dots.
3. If the LCD control panel blinks, the system is resetting. Done!

How do I reset my Nikon D3500 to factory settings?

How To Reset Nikon D3500 DSLR Camera To Its Factory Settings

1. Turn on your camera.
2. Press the MENU button to enter the main menu.
3. Go to the SETUP tab menu.
4. On the SETUP tab, scroll down to find RESET ALL SETTINGS.
5. When a confirmation appears on the display, select YES to execute the factory reset.

How do I reset my open gear?

Using a bent paper clip or similar, push the ERASE button twice within 2 seconds while the unit is up and running (allow a few minutes for boot to complete if you’ve just powered on).

How do I Reset my OfficeJet 7100 to factory settings?

Pull the power cord out of the back of the OfficeJet 7100 printer. Do not power the unit down before removing the power cord. Leave the unit unplugged for 10 to 15 minutes to clear its memory. Reattach the power cord. Hold the “Enter” key on the front panel down, then power on the unit.

How to reset pfSense to factory default settings?

Power on PFsense and wait 10 seconds and push in reset button and hold until pfsense resets (about 30 Seconds). Identify the COM port of the pfsense when you plug it in via mini USB in the Device Manager (devmgmt.msc). It should look something like this

How do I reset the configuration to factory default settings?

To reset the configuration to factory defaults using the console: Access the console menu locally or via SSH with an admin-level account (admin, root, or another privileged account using sudo). Enter the menu option which corresponds with Reset to factory defaults (e.g. 4)

How do I access the factory firmware for my Netgate 7100 desktop?

Please open a support ticket to request access to the factory firmware by selecting Firmware Access as the General Problem and then select Netgate 7100 Desktop for the platform. Make sure to include the serial number in the ticket to expedite access.