How do I reset my Canon 300 printer?

How do I reset my Canon 300 printer?

Instructions to change the machine back to its default settings.

1. Press the button repeatedly to display [DEVICE SETTINGS].
2. Press the left or right arrow to select [RESTORE DEFAULT], then press the button.
3. Press the left or right arrow to select one of the below options and then press .

How do I fix Error 03 on my Canon printer?

Close the paper output cover, then reload the paper….Paper Is Jammed inside the Machine

1. Make sure that the jammed paper is not under the FINE cartridge holder.
2. Hold the jammed paper with your hands.
3. Pull the paper slowly not to tear it, then pull the paper out.
4. Make sure that all the jammed paper is removed.

How do I fix a Canon b203 error?

How can I fix Canon printer error b203?

1. Perform a power cycle. At first, turn off your Canon printer.
2. Check your ink cartridge. First of all, turn off your printer and make sure all the ink cartridges are full.
3. Rule out a potentially bad network connection.
4. Remove paper jam.
5. Update drivers.
6. Use Windows Troubleshooter.

What does the triangle mean on my Canon printer?

The orange triangle with the lightning bolt comes on when the printer is plugged in. The white light above the power button is on, but the printer is otherwise dead. I haven’t used the printer that often in the past year, and just replaced the original ink cartridges last week.

How to reset waste ink counter canon Pixma mp210 and mp220?

Reset Waste Ink Counter Canon Pixma MP210 and Canon Pixma MP220 Start with printer off Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on hold the Power button, release Resume Button.

How to reset counter absorber on canon mp460?

Without releasing the Power Button, double click “Resume” button and then release Both Buttons. Click “Resume” for four times then click “Power” button, to confirm the selected action (reset counter absorber). It is basically a modified reset procedure for Canon MP460.

How do I Reset my canon Pixma mp140?

Reset Canon MP140. Reset methode on canon MP145 work also on MP140, you can read the methode here: reset waste ink counter canon pixma mp145. Reset Canon Pixma MP160, Mp180, MP460. To reset the printer model you can use MPtool software, the reset methode can be found here: reset canon pixma mp160, mp170, mp180 and mp460 using mptool software.

How do I reset the cartridge on my canon mp240?

For the MP240 just hold down the red button (circle with triangle in it) for about 15 seconds. This resets the cartridge, the led will still flash but it will print. I have tried this and it works. (your printer needs to be on BTW, just in case you wondered