How do I get to advanced BIOS settings on GIGABYTE?

By pressing “F1” you should get a help screen which shows you what keys you can use. Pressing “CTRL+F1” in the main menu in the BIOS on some GIGABYTE motherboard allow you to load more advanced settings, but this is only recommended for advanced users that know their way around the BIOS settings.

Where is PTT in GIGABYTE BIOS?

After loading into the BIOS, press ‘F2’ to switch to advanced mode. Click on ‘Peripherals’ and you will see ‘Intel Platform Trust Technology’ (PTT) Click on PTT and switch to ‘Enabled’ Save and exit.

How do I enable GIGABYTE BIOS?

When starting up the PC, press “Del” to enter BIOS setting and then press F8 to enter Dual BIOS setting. No need to press F1 when starting the PC, which is described in our manual.

How do I enable Sam on my GIGABYTE motherboard?

To make sure that the Smart Access Memory function is enabled, just go to your graphics properties “Resource settings” in the Device Manager of Windows 10. If you see the item “Large Memory Range” then you’re on the right track. The latest BIOS of GIGABYTE X570, B550, A520 motherboards has been updated on the website.

How do I get into Gigabyte UEFI BIOS?

To access the BIOS Setup program, press the DEL> key during the POST when the power is turned on. BIOS flashing is potentially risky, if you do not encounter problems of using the current BIOS version, it is recommended that you don’t flash the BIOS. To flash the BIOS, do it with caution.

How do I open the boot menu on Gigabyte?

Press F12 at the Boot Screen to bring up the Boot Menu.

How do I enable PTT in BIOS?

To access this option, tap Advanced, tap System Setup, and then tap Enter on the Security Configuration option. Select PTT (Intel Platform Trust Technology) to Enable or Disable Trusted Platform Module support.

How do you see if Sam is enabled?

You can now verify whether or not AMD SAM is enabled by launching the AMD Radeon app. In the Performance tab, a toggle is listed in the Tuning section. If it’s grayed out following the steps above, try updating your PC’s BIOS and the AMD Radeon software. Repeat the steps to enable the two features and check again.

How do I activate Sam?

How To Enable SAM Through BIOS

Enter your motherboard BIOS, typically done with Del or F2 key (see your motheboard documentation for details)
Enter your advanced settings menu.
If applicable, such as on Asus motherboards, enter PCIE Subsystem settings.
Enable “Above 4G Decoding”