How do I get my Pioneer receiver out of demo mode?

How do I get my Pioneer receiver out of demo mode?

The demo mode can be shut off by using the Auto MCACC setup. Just plug in the included Mic in the front and set it at the listening area. Or, the other way is to go to the HOME MENU and go to FL demo and turn it off there.

How do I update the firmware on my Pioneer VSX 1021?

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and then press HOME MENU. 2 Select “System Setup” from the HOME MENU. 3 Select “Other Setup” from the Other Setup menu. 4 Select “Software Update” from the System Setup menu.

How do I turn off Zone 2 on my Pioneer receiver?

You can turn on or off the power for zone 2 by the following procedure.

1. Select [Settings] – [Zone Settings] from the home menu.
2. Select [Power].
3. Select [On] or [Off].

What is Zone 2 on Pioneer receiver?

The zone 2 feature allows this receiver to send a second source signal to a separate audio system in another location. For example, you can watch a DVD in the main zone, while others can listen to a CD in zone 2 at the same time.

How do I turn off Zone 2?

Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit.

What does the ue22 code on my Receiver mean?

According to the User manual a UE22 code indicates a failed software update. (scroll to p.75). If you haven’t tried to update the firmware in the receiver then perhaps the wrong buttons have been operated on the remote control which placed the receiver in the update “mode”.

What is wrong with my vsx-52?

My Vsx-52 (purchased dec. 2011) has the same issue. It is a bad HDMI board and must be replaced. Pioneer has been offering a free fix to this ($600) problem.

Where is the DTS chip on the pioneer vsx-1021-k?

No UE22 error code, no more weird Static/Crackling noises on my Pioneer VSX-1021-K – Locate the DTS chip. Its in the middle of the top circuit board (the one connected to HDMI) (see image below)

Does the vsx-51 have a DTS chip in it?

I just looked at a vsx-51 doing this. There’s a ball-grid-array DTS chip on the digital pcb. Cooking this with a heat gun for 30-40 seconds (with the rcvr unplugged) has resoldered it, (no more UE-22), for now.