What is frit 3110?

What is frit 3110?

Ferro Frit 3110 is a ‘High Alkaline’ Frit that is low in Boron. It is primarily used as a glaze or body flux in the art ware and hobby fields. Fusion Temp: 1400 F. Flow Temp: 1700… Frits are combined raw materials that are mixed, fired, melted, crushed and ground into a powder.

What is a ferro frit?

Frits are glaze materials which have been melted, cooled, and ground into a powder which is then added to a glaze formula for the purpose of rendering insoluble any soluble materials. The use of frits also allows for the incorporation of certain raw materials in the creation of glazes.

What is the difference between frit 3124 and 3134?

Fortunately, these frits are similar. Except for one thing: Frit 3134 has almost no Al2O3 (3124 has lots) and significantly less SiO2. That is a game changer, making it melt dramatically more and lower. Not surprisingly then, her glaze melted way too much, running off the ware.

Is frit 3134 a flux?

-It has high boron. That gives it a lot of bang-for-buck as a flux, especially in middle temperature. -It has a very high CaO content. That makes it useful for developing chrome-tin pinks and maroons.

What is borax frit?

Borax Frits Borax frits are often used in the production of earthenware glazes when a lead free glaze is required. Slight milkiness, especially at lower temperatures, may be evident over red clays, and the colour response with oxides, etc. is not usually so vivid as with lead frits.

What is alkaline frit?

A highly alkaline frit used as a basis for raku glazes. Produces intense alkaline colours when used with oxides which have a crazed appearance.

What does frit do in a glaze?

A frit is a type of ceramic glass. It is a combination of materials that, when melted together, are rendered insoluble and resistant to acid attack. They are, therefore, a means of introducing certain materials into a glaze which would otherwise be toxic.

Is frit a flux?

A frit is a combination of a flux or several fluxes (lead, borax, boric acid, potassium carbonate) that is combined with other in- soluble materials (quartz, feldspar, lime etc.), melted in a kiln to form an insoluble glass, and ground to be used as the base for making glazes.

Is borax the same as borax frit?

This term is very generic, referring of course to frits that contain boron. Unfortunately that is 80-90% of available frits! Boron frits may have 1% boron or 50% boron. Even though the boron in the frit is no longer in the borax form it is still customary to refer to such as “borax frits”.

What is borosilicate frit?

Frit refers to granular crushed glass. It is available in several different mesh sizes.

Is frit the same as silica?

In general, frits, glasses and faience are similar materials: they are all silica-based but have different concentrations of alkali, copper and lime.

What is Ferro frit 3110 used for?

Ferro Frit 3110. Soft sodium borosilicate frit for glazes. Often used in crystal glazes.This frit can be very useful to reduce the feldspar content in glazes (since many high feldspar glazes have low clay content and therefore poor slurry suspension properties and dried hardness).

What is frit 3110 called in pottery?

Alternate Names: F3110, Frit KFG 4110, Ferro Crystal Frit, Ferro Frit 3110-2 This is a USA pottery frit, Ferro now calls it Frit 3110-2. Soft sodium borosilicate frit for glazes. Since it is a good source of Na 2 O it is very commonly found in glaze recipes all temperatures.

What is Ferro frit?

High alkali, low alumina and boron leadless high expansion frit. Alternate Names: F3110, Frit KFG 4110, Ferro Crystal Frit, Ferro Frit 3110-2. This is a USA pottery frit, Ferro now calls it Frit 3110-2. Soft sodium borosilicate frit for glazes. Since it is a good source of Na2O it is very commonly found in glaze recipes all temperatures.

What is a good substitute for Ferro frit 3195?

Standard Borax Frit is pretty much a straight swap for Ferro Frit 3124, 3134 is pretty close too and would probably be ok with a straight swap. Frit 3195 could probably be made up from half the amount of calcium borate frit and extra silica to match. More sharing options…