What is Cty in Cisco?
The router’s console port (CTY) The router’s asynchronous ports (TTYs), used for dial-in and dial-out modem connections. The router’s auxiliary port (AUX), used for backup modem connections.
What does the boot system command do?
The boot system command allows you to specify not only which IOS images to boot from, but also the order to try them in if it has trouble booting. In the example, this router will try a succession of three different IOS images. If they all fail, it will resort to using its boot ROM image.
What is the command for motd?
To configure a banner and message of the day (MOTD), use the banner-motd command in global configuration mode. To remove the banner or MOTD, use the no form of the command. To verify the configuration, use the show running-config banner-motd command.
What is Bootflash Cisco?
Bootflash generally hosts a bootloader program. Depending on device, it might be a very small basic bootloader, i.e. just enough to perhaps do some quick hardware startup diagnostics and then boots the main IOS. Or, bootlflash might contain a “miniature” IOS. Flash generally hosts the main IOS program.
What is Fullform Cisco?
1. Cisco is short for San Francisco. “Cisco” is short for San Francisco, the city where Stanford computer scientists Leonard Bosack and Sandy Lerner founded the company in 1984. That’s why in Cisco’s early days, Bosack and Lerner insisted on branding its products with the lowercase “cisco”.
What is ROM monitor?
The ROM Monitor is a bootstrap program that initializes the hardware and boots the Cisco IOS XE software when you power on or reload a router. When you connect a terminal to the router that is in ROM Monitor mode, the ROM Monitor command-line interface (CLI) prompt is displayed.
Does copy run start?
Use the command copy running-config startup-config (copy run start) to overwrite the current startup config file with what is currently in the running configuration file.
What is the difference between Bootflash and flash?
Bootflash and flash are the same, slot0: is for a flash memory PCMCIA card. Bootflash: is onboard on the supervisor and you can change it, but you will need to shutdown the supervisor and unplug it to change it.
What is the meaning of CCNP?
CCNP is the Cisco Certified Network Professional certification. This certification is available for IT professionals with at least one year of experience in professional networking.
What is the activation character in Linux?
The activation character is the character that starts a terminal session when it is typed at a vacant terminal. The default activation character is Enter; you can set it to another value using the activation-character command.
How do I activate/deactivate a character?
The .character list command will show all characters, whether they are active or deactive, and from there they can be activated/deactivated with the following commands. Alternatively, characters can be managed by logging into the Ascension website and viewing the My Characters list .
What is the default activation character for the console to delete?
Note If you are using the autoselect function, set the activation character to the default, Return, and exec-character-bits to 7. If you change these defaults, the application will not recognize the activation request. The following example shows how to set the activation character for the console to Delete, which is decimal character 127:
Why can’t I activate a character with a series of numbers?
If a character has a series of numbers after it and is unable to be activated, it means that character has been flagged for a rename, and must be manually activated with the in-game commands. When activating a character with a series of numbers in it’s name, the full name including all numbers must be included in the activation command.