How do you change the filter on a dreammaker spa?

To change between each filter mode on a Dream maker Spa first push either the decrease or increase temperature button followed by the light button which will put you into the mode selection, then with the temperature buttons you can toggle between the 3 modes to chose your desired filtration and heating mode.

What size are Cleverspa filters?

Size: H15. 6, W7. 8, D10cm. Weight: 0.17kg.

Are all CleverSpa filters the same?

Old/dirty filters do need replacing with new ones; however this cleaning tip should extend their life. All filters are compatible with all CleverSpa® Hot Tubs.

Do wave spa filters fit CleverSpa?

High quality Happy Hot Tubs HHTCS10 replacement filter compatible with CleverSpa inflatable hot tubs. 2 fiters in each pack. Also compatible with Wave Spa (2016-2019), Cosy Spa, Aquaparx, Aqua Spa, Costway, All Seasons, Ospazia, G Spa and Nordic Spa.

Why won’t My Dream Maker Spa heat up?

Heat and Jets Low or no heat may be the result when the filter is dirty or the jets are not fully open. Clean the filter and open the jets to test whether the heat problem resolves. If the jets won’t come on or if you notice no air bubbles, check that the power is turned on and the jets are fully open.

What does PR mean on a Dream Maker Spa?

Pr = When spa is first actuated, it will go into Priming Mode. ILOC = Interlock failure – possible pump or ozone spike . (—) =Unknown water temperature.

Where does the filter go in a CleverSpa?

Screw the Filter Cartridge (B) onto the Filter Connector (N) turning clockwise until hand tight. Add the Filter Protector Cover (C) onto the Filter Cartridge (B). Your CleverSpa® is now ready to be filled with water. Fill with a suitable hose to the water level as indicated.

Where does the filter go in a wave hot tub?

It is really easy to fit the filter, just screw the filter connector in line with the control module just above the hot tub floor.

How do you clean a wave spa?

Simply mix a solution of equal parts vinegar and water into a spray bottle and give it a good shake. Generously spray the waterline of your hot tub and let the solution work its magic. After 15 minutes, carefully wipe down your liner with a Spa Cleaning Mitt.